• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Gerryk

  1. G

    OBD2 Scanner aps

    Hi just looking for some info on these obd2 aps and how accurate they are. I am using the obdlink MX Wi-Fi in my obd port and Dashcomand and Obdlink aps. These aps seem very responsive and work well but are they accurate. According to them I am hitting 310 hp now if they are accurate would that...
  2. G

    OBD2 Scanner aps

    Just wondering how accurate these aps are? I am using the obdlink MX Wi-Fi in my obd2 port. The aps I am using are Dashcomand and Obdlink and they seem to be very responsive. According to them I am getting 310 hp and 315 ft-lb of torque. Now if this is accurate would that be to the wheel? All...
  3. G

    Rockers and cam

    Hi again I am doing a budget build. For the engine all used parts and all in great shape or brand new, heres what I have. Ported supercharger,ported heads,Ls6 springs,modified retainers,42.5 injectors,3.4 zzp mps,cai, Pacesetter headers,overkill sbc cam,Yella terra 1.7 rockers. Now what I need...
  4. G

    Methanol injection

    Hi everyone where should you put the injection nozzle on a supercharged l67
  5. G

    MAF Sensor problem

    Hi I traced all the wires from the MAF sensor to the PCM and there are no breaks. The problem is that I don't get 12 volts to my MAF sensor there for engine light
  6. G

    2001 two door GTP

    This is a must see car comes with extra engine and trans and numerous parts. This car has 164340 km or 102000 miles on it there is no rust and has mods done to it to much to list. I have had this car for four years I bought it in Regina and had it shipped here to Ontario as I said its a must...
  7. G

    Need some helpful advice

    Ok here goes I have a 01 GTP I blew the motor this fall so I am starting over. The mods that the car had when I bought it are 3.5 pully, cold air intake, zzp 1.0 pcm, zzp 3'' down pipe with cat, I was running autolite 605 copper core plugs. That is what I know and could see but some one was...
  8. G

    Please help

    Hi all I had a 336 code crankshaft position sensor circuit range or performance problem.At first my car was idling up and down between 1300 and 800 rpm when I would stop at a light I hade to put it in park to keep it going and this morning it just died at a light and won't start now this all...
  9. G

    Trouble code

    Hi all I had a 336 code crankshaft position sensor circuit range or performance problem.At first my car was idling up and down between 1300 and 800 rpm when I would stop at a light I hade to put it in park to keep it going and this morning it just died at a light and won't start now this all...
  10. G

    Trouble code

    I hope somone can help me I have a 01 gtp and it has a problem so I scaned it and got a P0300 code.It said that I haverandom misfire detected.could it be that I jumped my timming some how
  11. G

    Plug gap

    These are my mods 3.5 pully,104 autolite plugs,cai cone in box,zzp 1.0 pcm.What shouls the gap be for my plugs.
  12. G

    01 GTP light problem

    Problem with the blue security light that blinks on most cars after you turn your car off. Well mine ether stays on or dose not come on at all any help with this would be nice as i live in a bad aria.
  13. G

    Newbie here with shift prob

    Hi all just bought my 01 GP GTP three weeks ago love the car and the ride.I have two probs with it and hope someone can help me out. Every once in a while when I turn it off the key won't go all the way back and I have to play with it to get it back.The other prob is the every once in a while it...
See more
Back
Top