• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by duswickware

  1. duswickware

    Help?

    While I was cleaning the threads on the block for my head bolts, the tap went too deep and fell off in the block. Top far right hole in the front. 98 gtp, any suggestions getting it out, not sure if it was a coolant port or oil.
  2. duswickware

    Steering shaft green plastic

    While replacing the steering shaft I cracked and broke the green part above it. Any one know what it is or if it will affect anything?
  3. duswickware

    04+ rack and pinion on 2000

    My rack started leaking few months ago. Found a used rack with magna steer at my local yard, motor and trans are gone all left is the rack and cradle sitting on the ground so will be the easiest to get to and only has 3400 on it. The part number are different online but seen somewhere someone...
  4. duswickware

    Springs backward?

    Since I've put my lowering spring on I've noticed and he rear sits lower than Han to he front...by about an inch or more. You he front is lower than stock but whenever I jack the front end up the spring slides of the upper mount. Not sure what brand they are was told b&g. So is it possible I...
  5. duswickware

    B&G springs

    Went and bought some lowering springs today....guy told me the where b&g but how can I be sure of this? Tried the number on the springs themselves76364 and 76366 but can't find any proof. How can I know for sure?
  6. duswickware

    Key and button under dash?

    Looking under my dash today and noticed there is a key with a grey wire wrapped around it not really sure of the purpose but dont wanna take it off and car not start and a couple layers of electrical tape wrapped around it, also found a little black button( it looks like) hanging...
  7. duswickware

    04+ spoiler on 97-03

    Anybody ever tried an 04+ spoiler any type on and 97-03? Or would this look completly ridiculous.
  8. duswickware

    Kr/ timing advance

    So on the way home I noticed my kr was at 3.7 and timing advance was at 35. This was going from 60 to 80 on a pull jus to see...I know all stock will have kr but not sure if the timing is normal or not.
  9. duswickware

    P0440 code and rich/ lean fuel

    Been using my torque app playing around to figure it out. I know the p0440 is evap code but this is the only code I have. In another part of the app( o think the test part) shows lean/rich sensor swith time...not sure what this is, told it may be a o2 sensor. Not sure how to test anything on...
  10. duswickware

    sanding marks

    Few days ago I resprayed under the gas door and everything looks good for being my first attempt. Wet sanded off some over spray with 1200 griut wet sand paper and now can see marks from where I sanded it right above the pin stripes and on the rear door. Should I go to a finer grit paper and...
  11. duswickware

    Fuel tank fitment

    Noticed this morning a nice sized puddle of gas under the car and a rusted out fuel tank. Buddy gave me a tank from what he says was an 01 se, not title so not positive that's the year. I have a 98 gtp, by looking at them they looked the same but im not completly sure.....anyone have input...
  12. duswickware

    Vacuum issue

    Put a 97 regal motor sc'ed in my 98 gtp everything together jus stuck on how to run the vacuum hoses bein the regal motor has the extra two ports on the blower. What changes need to be made to make this work? A diagram or picture or any help would be appriciated. Sent from my ONE_TOUCH_960C...
See more
Back
Top