• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by copperpacecar

  1. copperpacecar

    16:1 afr in power enrichment mode

    just as the title states...i have my pcm tuned to a afr of 11.3:1 in power enrichment mode and after dropping a new motor in my afr has gone crazy and pegged my wideband. even the normal vehicles o2 sensor is reading lean in power enrichemnt. i just swapped out my high compression na block for a...
  2. copperpacecar

    fans fans fans

    i cant get my fans to come on unless i command them on using hptuners? why? i have a 160 degree stat and ive tuned the car to turn on fan one at 165 and off at 163 and the second fan to run at 168 and off at 164 but neither fan will come on even if the engine coolant temp goes well above 200...
  3. copperpacecar

    ignition coil control high voltage?

    since getting this code ive replaced the module, all coils, plugs, wires and the mount for the ignition module...what could this be?
  4. copperpacecar

    getting sick of this car

    okay...added the nonsupercharged block to my car and now have nothing but problems and im hoping one of you guys have a solution cause im at wits end. put the heads and gen v on and the car runs like crap..first it wont let me run a case learn. hptuners start the procedure then states that the...
  5. copperpacecar

    what you get for $1300

    ordered tog headers from 3800performance with the cat kit and this is what i got...i dont mind getting raped for good parts but i expect that they be finished, functional, and that they not need modified..well i guess $1300 wasnt enouph
  6. copperpacecar

    zzp is angry with me :)

    so been having problems with speeddaddy headers warping and causing leaks at the heads so was looking to upgrade to a better product so i wrote zzp and told them if they wanted a sale i had some questions and they had to call me...well we all know that doesnt work so after they wrote multiple...
  7. copperpacecar

    knock issue

    my mods are...high compression block, xp cam, springs, speed daddy headers, gen 5, meth injection, northstar, 3.29 gears, and 3.1 pulley...problem is im getting bursts of knock at shift...itll hit 9 and drift down to zero but half the time it wont do it at all. took the timing down to 13 and ran...
  8. copperpacecar

    xp cam and 105 lifter question

    how much noice is this combo suppose to make as my lifters sound like a diesel motor they are tapping so hard
  9. copperpacecar

    head question

    is there a difference between the sc and nonsc heads on the series two motor?
  10. copperpacecar

    anyone want an abs removal how to thread?

    i finally made my abs go away!!! i was thinking about adding a how to but i dont really wanna do the work writing one up if no one is interested...
  11. copperpacecar

    wiring schematic needed

    cant find a wiring schematic for the abs system anywhere...anyone got one?
  12. copperpacecar

    low miles 3800 been sitting for a while

    got a very low miles 3800 but its been sitting in a garage for 2 years. what do i need to do to safely start it up? how do i prime this motor?
  13. copperpacecar

    e85 and 65lbs injectors

    switching to e85 and 65lbs injectors and have a question. i know your suppose to add about 30% more fuel for e85 but is that with the same injectors. since im doing both at the same time from stock injectors do i first factor in for the injectors then add 30% or just the 30%? if i have to factor...
  14. copperpacecar

    how bad is this with a 2.5

    running a 2.5 pulley with perfectly clean rotors....is this bad and how much loss will is see?
  15. copperpacecar

    e85 and meth????????

    switching my car over to e85 cause i love corn but seeing the awesome qualities of e85 would there be any benefit to keeping my meth injection or would the e85 cancell out any benefit the meth would bring?
See more
Back
Top