• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by comongoose

  1. comongoose

    what is normal ignition?

    On my scan gauge it says 27* at idle and goes down as i give it gas. Is this normal I always thought ignition went up with rpms? What is the standard? Do you guys think this indicates my crank pulley is not keyed in right?
  2. comongoose

    Knock because of crank pulley or fuel pump

    Ok so I just got over my last issue of the car not starting due to a malfunctioning CPS. I was then having trouble with putting the crank pulley on the right way. I put it on not keyed the right way three times in a row. On the second to last time I test drove it, the idle was high, and the...
  3. comongoose

    Ignition problem ICM or fuse?

    Hi I just recently got done with my bottom swap and decided to drive to UF for the first time with the GTP and of course the car goes and embarrasses me. As I pulled into the parking garage my car dies and won't start back up. Needless to say my day was ruined as i missed a chem 2 final, and...
  4. comongoose

    vacuum pressure problem

    Well I just recently got done putting the new motor in and now the car idles really rough. The map sensor jumps from 35-65 KPa. I noticed that my brakes also felt as though there was no brake booster connected to them. Anyways I found that when I caped the nipple on the supercharger that goes...
  5. comongoose

    brake booster vacuum problem

    Well I just recently got done putting the new motor in and now the car idles really rough. The map sensor jumps from 35-65 KPa. I noticed that my brakes also felt as though there was no brake booster connected to them. Anyways I found that when I caped the nipple on the supercharger that goes...
  6. comongoose

    mono amp vs two channel

    Okay I have a great question for some audio gurus. I need to power my two alpine type r 10" subs. They are both rated at 500 watts rms and have DVC so I can wire these two subs in any impedance configuration from 1 to 8 ohms pretty much. From my understanding It seems the higher the...
  7. comongoose

    Diagnostics on a Head Unit

    I was wondering if any one knew of a way to run diagnostic software on an in dash head unit. For instance maybe you could run hp tuners diagnostic on one of pioneers nice in-dash touchscreen head units. Some come with hard drives and have usb connection. I know I could easily do this with say a...
  8. comongoose

    Head Unit Steering Wheel Controls

    So, I just bought a set of component alpine 6.5"s and a nice pioneer head unit. Anyways I just tested to see if the head unit worked, since I am connecting everything with amps ne ways. head unit works fine but the volume control and other controls on the steering wheel do not work. I noticed...
  9. comongoose

    Important FIX while Working on rest of site!

    I noticed this glitch with the old interface as well, and looks like it is still not fixed. When you click on local chapters and click to see all groups it just loads up one new group in the header. I think this would help the community out greatly if there was a way to see groups in your...
  10. comongoose

    New forum look

    I love the new look of this site, even though I hate blue, it is much cleaner and sharper looking. It caught by surprise when I turned to the next page of a thread and saw the change. Props to the web designer, huge upgrade from the last look(kinda ricer look before).
  11. comongoose

    How do you get the crank pulley/harmonic balancer off???

    I'm trying to pull the crank pulley off to get it on my l26. After breaking 2 sockets and one heavy duty wrench,I heated the lock bolt with a torch to finally get it off. Now, how do I slide the pulley off. I just picked up a pulley puller kit from harbor freight, and there is no thread to...
  12. comongoose

    Bad Compression?

    So as some of you may know I am currently in the process of putting an L26 bottom with an L67 top into my car. Right now I am a little past the mid-way point, as today I had got the valve train on and the lim torqued down, with the motor on a stand. Me and my buddy then decided to get a quick...
  13. comongoose

    Pulling the motor write up

    Are there any write-ups or guides for the easiest way to pulling the motor out and putting a new one back in? any advice is much appreciated.
  14. comongoose

    newer generation interior swap and SE spoiler

    Does anyone know what are all the parts from the 04+ gp that will bolt into the 97-03 gp...I like the seats a lot and would like to switch as much stuff as I can Later on down the road. Also does any one know where to find the special edition or slp II spoiler for cheap? thanks for any input.
  15. comongoose

    Do all GTPs have HUD

    Just out of curiosity do they? that would be awesome.
See more
Back
Top