• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Comanche1959

  1. Comanche1959

    2001 GTP Coupe rubber door top molding

    The molding that runs along the top of the doors are getting dry and tearing at the back. Anyone know where I can view a parts breakdown and order them? When it rains I'm getting a drip here and there. Thanks, Steve
  2. Comanche1959

    ABS Controller Repair 2001 GTP

    I sent my ABS controller out to a guy in the Richmond, VA area a couple years ago who rebuilt and returned it in a day or two. Seems like it was a standard rebuild charge for about $110 or so. Anyone had one done recently with good results? Where are you getting them repaired? Mine is going...
  3. Comanche1959

    Molded vacuum hose

    Got an '01 GTP, and I'm working a code for a bad MAF sensor. Whlie cleaning the sensor, I noticed a cracked vacuum hose to the left of the MAF sensor that is a molded elbow from the throttle body housing to a hard plastic vacuum line. It's a molded elbow that has a large size on the end that...
  4. Comanche1959

    2001 GTP Smoke and electrical smell with heater fan on

    Had heater on second fan position and got an electrical smell and some smoke. Shut it down to make sure car wasn't going to catch on fire. Afterward I only have position 5 on the blower. I read some posts on the older cars and people are saying blower resistor and fan motor. I never did put...
  5. Comanche1959

    Headlight Aiming

    Replaced my headlights over a year ago and was never really satisfied with the aiming. Anybody got some tips? Fog reveals how they're off, but short of adjusting them on a foggy night..... Thought about covering one side up and adjusting them one at a time to keep from getting confused by the...
  6. Comanche1959

    ABS / TCS Codes 2001 GTP

    I've read many, many ABS posts here and they all sound similar but a little different than my problem. Symptom is intermittent ABS & TCS Off lights with the steering going a little stiff. I pulled all 4 wheels, checked the plugs, wires, wheel hub play (RF has a "tiny" bit of play). I put a...
  7. Comanche1959

    Exhaust Manifold Heat Shields

    When I replaced spark plugs and wires, I must have tweaked one of the aluminum heat shields around the front manifold. Anyhow, it vibrates when the engine is under load, or in overdrive and the buzzing is gettin' on my nerves. :o I'm thinking about ripping them outta there. Are they really...
  8. Comanche1959

    NACA Ducts - High Temp

    Does anyone know where I can find some sources of NACA ducts with 2" outlets that I can use in the engine compartment? I need something that will withstand higher temps so they won't melt or catch on fire. I'll be using 2" 600 degree orange scat hoses on them. I found numerous ones made from...
  9. Comanche1959

    Ignition Switch Won't Release Key 2001 GTP

    When I shut the car off today, the ignition switch wouldn't turn to the key removal position and the "park" indicator in the instrument cluster remained lit up. I was able to start the engine again, move the gear selector into gear and back in park and the key came out after I shut it off...
  10. Comanche1959

    Leather seat comfort - more or replace padding?

    2001 GTP...my seat bottom cushions are getting pretty flat. Any suggestions about replacing or adding to the cushion for some increased ass comfort? :cool: Steve
  11. Comanche1959

    Brake Rotor Choice

    Got a 2001 GTP that's an everyday driver and my daily commute is 20mi round trip of non interstate driving. I've got 124K miles and my last brake job was solid rotors and ceramic pads (NAPA I think) and they've done a great job....no chatter, etc. That was about 6+ yrs ago (really...no s**t)...
  12. Comanche1959

    01' GTP Front End Clunk

    At low speed like approaching an intersection, or in parking lots, I get a clunk when making a right turn on a slight down grade when I hit a bump in the pavement. I've read some of the other posts, and have a recent new sway bar (1 year old) and just put new link bushing kits on both sides and...
  13. Comanche1959

    Engine Service Light caused by oil overfill?

    I changed oil yesterday and used one of those 5qt jugs for the the first time, and as a result over filled it by about 1/2 qt or so. I drove ot to the car wash and got an engine service light on the way back. Did overfilling with oil cause it? If I drain the excess out and disconnect the...
See more
Back
Top