• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Brooks

  1. Brooks

    Fraudulent Ebay Listing: 99GP w/ XP cam AND1.9 rockers...

    1.9 rockers w/xp cam and no head work?!? Gen V Blower but the photos show a series II cover w/no N* or LQ4 MAF?!? ZZP Headers and U Bend Delete?!? Sure, its easy to say not my problem and let some unsuspecting sucker pick this up, but I'd like someone to warn me before I got scammed. I feel...
  2. Brooks

    Is there a DHP version that performs caselearn?

    Attempting to perform a case learn. I believe its possible with DHP, however it does not appear on the version that I have. 1.2.4, and from what I have read its suppose to be under the scantool options, not on mine. Does anyone have a version that does? I would be very greatful to anyone who...
  3. Brooks

    Car starts 3-4 seconds and shuts off. P0122 and P1122

    DTC P0122 Throttle Position (TP) Sensor Circuit Low Voltage DTC P1122 Throttle Position (TP) Sensor Circuit Intermittent Low Voltage Car is Regal GS w/gen V N* I put tog headers on the car, put all back together with both o2 sensors and now the car starts, runs 3-4 seconds and dies regardless...
  4. Brooks

    Help, Death Wobble!

    I should have looked into the clunk I'd been hearing sooner. This morning 5am on an on-ramp to the highway headed into the city I experienced death wobble. Thats the only way I can describe it because I've driven a Ram 2500 that had "Death Wobble" and saying simply shimmy or shake doesn't...
  5. Brooks

    Spark plug port adapter - 13$ or 88$ version?

    Mods/admin if this is the wrong location for this please move. Need to change the valve springs due to valve float I'm pretty sure I've got with the 1.9's at 110k on the car, need to change before anything else. Found two so far, one is 13$ the other is 88$. I only need to use it once... I...
  6. Brooks

    Help.. Strange Idle (video) after 1.9's/LIM gasket -

    Attempted cam install, failed to get the crank pulley off. While I was down there I replaced the LIM gasket and put the 1.9's from my shelf back into the genV. I have plog/pem 3'' down pipe, ngk55's gapped .045. SES came on, powrtunr scan said lean fuel trim and misfire. Cleared it and it...
  7. Brooks

    Interesting gasket came with Gen V, what for?

    The gen V I have came with this metallic gasket, I've always avoided using these so during orignal install I purchased a new one. I got desperate and when I put my motor back together I used it. Below is a picture of what the gasket looks like vs a normal. I am going to attempt to salvage the...
  8. Brooks

    Cam install. Can't get crank bold off.. any help?

    Cam install, cradle is lowered. Impact gun with tank good to 150psi. Breaker bar. All has failed. I can try the breaker bar and jack it up with my floor jack trying to rotate the bolt but I am worried about what may happen if I am forced to wedge the crank from spinning. I am spinning...
  9. Brooks

    What supporting valvetrain mods for cam?

    I will be changing out the 1.9 rockers and going to a cam over the next couple months. Intake or Exhaust lift won't exceed .536. What valvetrain mod's are required. I have read previous threads and understand the shift points will be raised above 6k but am confused as to what supporting...
  10. Brooks

    help!14.6@ my tune, 14.4@ stock tune w/genV+

    98 Buick Regal GS Engine: GenV lim/blower N*TB LQ4 MAF 3.4'' dial ur boost 3'' Magnaflow D/P Ported Manifold/PLOG 9'' Cold Air Kit 1.9 Roller Rockers autolite 104's 160* T-stat F body front brakes/rotors Eibach pro springs KYB AGX Struts I started with the 3.8'' and dropped when I saw no...
  11. Brooks

    Gen V swap.. coolant everywhere.

    98 Regal GS, Did the Gen III to a V, swapped LIM/Blower/TB. Engine started, ran for a bit, then died. I did not take it for a spin, just sat it at idol when this happened. No crazy noises or horrifying smoke or anything. The engine just turns and turns but wont fire. -I checked the fuel...
  12. Brooks

    did gen v swap, no spark. HELP

    Swapped out gen v LIM and s/c. Upon restart, noticed no restart. Engine just turns and turns. Fuel is notthe issue, shrater valve shoots shiz strong, have checked plugs multiple times, they appear wet. Have disconnected everything on TB side. I took out a plug and had someone turn it with the...
  13. Brooks

    Brake upgrade - What will I need to make this work?

    I want to stop faster, but I'm on a budget. What else do would I need to make this work. Ebay item 380184151436 119 +34 S&H 98-02 Camaro Firebird Trans Am Front Brakes w/ Spindles
  14. Brooks

    ZZP 1.9 Rockers in

    Took a few days working on it on and off to get done, any other single working parents out there know how it is to work on their vehicle. Straight through it could be done in half a day. Nothing complicated about the install, need to remove bones and ratchet strap the motor foreward to get to...
  15. Brooks

    Installed Rear ported exhaust manifolds, strange noise comeing out

    I installed the PEM and when I fired the motor back up, everything seems fine. No ses or anything strange at idol or even when I rev the motor without boost. When I drive out and get some boost it sounds like baseball cards in bike spokes, and it revs up with the supercharger. Nothing near air...
See more
Back
Top