• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Brick on Wheels

  1. B

    18" Eagle 077 Wheels, GTX Exhaust, ZZP Catted DP, FP Hotwire, Engine/Trans

    I have thinned the W-body herd, and now have more parts than cars. Location is Lynchburg OH 45142. Big items will need picked up from my shop. I posted pics to a Flickr account here: Flickr Set of 5 polished 18” Eagle 077 wheels. Could use a re-polish. Had a couple of cracks repaired by The...
  2. B

    Misfires, raw fuel smell, codes p0128 p0300

    Looking for some ideas on this one. Had to have the regal towed back home this morning. With no warning, started running rough and was way down on power. Getting HEAVY fuel smell out exhaust, and these codes: p0128 coolant thermostat p0300 Random/multiple misfire p0420 Catalyst below...
  3. B

    Keep cracking plugs on cylinder 5

    Guys, I keep cracking the porcelain on the #5 spark plug. I've cracked 3 now, and only got 100 miles on the last one. Any idea what is causing this? I'm not beating on the car at all, driving like a grandpa trying to get max economy. Plugs are Delco 41-101. Electrodes are fine, it's just the...
  4. B

    Tire rub after steering rack replacement

    So I've replaced the steering rack and outer tie rods, and now both front wheels are rubbing the rocker cladding. Did a search, and found another user posted pics of his similar issue. See here: http://i248.photobucket.com/albums/g...52731_1273.jpg What did I do to cause this? I dropped the...
  5. B

    Supercharger pulley removal question

    I have my snout off to do a coupler replacement. I ended up ordering a kit that includes bearings and seal, so now I'd like to replace those as well. Instead of using the pulley puller, can I just use my arbor press to press the shaft back out of the pulley and snout without destroying the pulley?
  6. B

    WTB Clean 98-03 GTP No rust

    Looking for a clean, 98-03 GTP. My must-haves: 1. No rust! Particularly in the rockers and strut towers. 2. Little to no mods. This will be a driver, not a racer. 3. Mileage in the low 100s or better. I want to put 100k+ of my own miles on it. Would prefer 6-8 hours tops from Ohio zip code...
  7. B

    ST5 cam, double roller, MPS etc

    Time to move out some parts that I’m never going to use. Items are located in Lynchburg OH. Shipping is extra, or you are welcome to pick them up in person. Items are used unless otherwise noted. Exact mileage is unknown. NEW Comp Rocker arm bolts (NEW $16) $10 Intense pushrods 5/16” X .049 X...
  8. B

    3.0 and 3.4 Modular Pulley Systems

    Location: Lynchburg OH 45142 Have a couple of MPS that I'm not going to use. First is a 3.4 black pulley with hub and screws. I believe this is ZZP bolt pattern. You can see in pic that from bolt to opposite bolt is approx 1 5/16". SOLD Also have 3.0 clear pulley with hub and screws. I believe...
  9. B

    Prices SLASHED 01-01-14: ZZP wires, ARP bolts, 2 gauge pod

    ZZP wires. Excellent shape. $50 shipped NOW $35 SHIPPED ARP rod bolts. $100 new plus shipping. $40 shipped NOW $25 SHIPPED 2 Gage Pillar Pod, Beige $25 shipped NOW $20 SHIPPED W-body Store headers. SOLD ZZP Stage 3 heads. SOLD ZZP modded rails. SOLD XPZ cam, excellent condition. Comes...
See more
Back
Top