• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by bobeebob

  1. bobeebob

    Looking for Throttle Body Alternatives

    Hey everyone, long story short I am trying to put a L67 from a 1998 bonneville with a Gen V m90 into a 2000 camaro. My biggest roadblock so far is that the camaro is drive by wire. For now I was going to use the camaro throttle but the bolt pattern is different than the bonneville. So my...
  2. bobeebob

    Waste of money? Eh, we'll see

    Hey everyone, just thought I'd take some time to give a sneak peak of what I've been working on for the past couple years. My car is a 1998 Bonneville ssei which was my first car given to me by my father. I initially didn't plan on doing any mods, but that all changed when I lost to a friends...
  3. bobeebob

    Question on valvetrain

    Hey everyone, I'm getting ready to send my heads out to get machined and I'm about to order some parts. I plan on running the stage 4 blower cam from intense with 7k rpm shift points. Is this setup up to the task? -Ls7 lifters -stock pushrods -stock rockers -titanium retainers -crow cam...
  4. bobeebob

    4th Gear Surge

    Its just one problem after the other with this car :th_angry-censored: After replacing the short block due to low oil pressure i was finally able to test the transmission i rebuilt myself. Mods on the tranny are as follows: 3.29 gear with 7/8th chain, hardened 4th gear shaft, and intense...
  5. bobeebob

    Low Oil Pressure

    Ok im gonna try and make this as short as possible. -swapped cams and everything ok -did some burnouts and on way home oil light came on -cold motor 35 psi at idle and 5 at hot idle (checked with mechanical gauge) What the question is, is if i can band aide the problem by replacing rod...
  6. bobeebob

    To add timing or not...

    I have decided to throw 3.29 gears in my 98 bonnie. Right now im running a shelf tune from Intense, and i will be sending the pcm back for the new gearing. Would it be worth while to add timing with my current mods? (stock timing btw) Gen V - stock pulley xp cam headers coming soon
  7. bobeebob

    First kill in the boat

    Coming home from a baseball game i spot a friend with a late 90's gti vr6. it was dead even until about 40 then i slowly started walking until we hit 80. my car is a 98 ssei with 3.5 pulley, tune, and intake
  8. bobeebob

    02 Simulator

    What are your thoughts on 02 simulators? do they work? are they reliable? for me it seems the easiest way to go dealing with removing the cat
  9. bobeebob

    Clutch slip?

    Hey everyone, today i went out in an empty parking lot trying to work on my launches. and of course i think ive come across a tranny problem. First time ever doing a hard launch with car, whole car shakes as if wheels are skipping on pavement, but there not. My first thought was bad mounts, but...
  10. bobeebob

    Cam swap, tune needed?

    Hey all, thinking of getting the XP cam for my Bonneville, currently i have a shelf tune from intense. Will i need a proper tune if i swap cams? And what risks do i run with the tune i have now?
See more
Back
Top