• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by bigdan002001

  1. B

    New OEM Brake line won't stop leaking!

    I bought a brand new AC delco driver's side front brake line 10425230 as well as new passengers side one, and where the new driver's side one threads into the ABS unit, I can't seem to get it tight enough to stop leaking back up thru fitting between fitting and line? I keep snugging it tighter...
  2. B

    Fuel Filter nightmare!

    Ok, well my fuel filter is so old and rusted that after I got the engine and transmission completed and re-installed back into the car I noticed that gas was leaking from the filter. So I began to try to get the thing out. I had the hardest time getting the plastic line end to remove from the...
  3. B

    Upper plastic intake bolt question

    Just wondered if I needed to use loctite on these bolts? GM manual says to in one place but not to in another. I have them currently installed and torqued down but didn't know if I should pull one at a time and put blue loctite on and retorque? Thanks
  4. B

    Rear Exhaust manifold to downpipe gasket

    I bought a new felpro 61310 metal gasket and for the life of me can't remember which way it turned. The one side the "hump" is bigger than the other. Can anyone tell me which direction faces which? Thanks, Dan
  5. B

    3.8L lower intake side cover bolts

    Does anyone know the torque spec for the side cover bolts on the lower intake. I have intake off and replacing gaskets and wanted to change out this little cover gasket as well bit can't seem to locate torque specs for these two bolts. Thanks Dan
  6. B

    A/C Compressor Bracket & Bolts

    Hello, I am in the process of reassembling my engine and would like to know what the torque spec is for the two bolts the hold the bracket to the engine block. GM Service manual has two different specs in two different places, so it's contradictory. One place states that both bolts are 37...
See more
Back
Top