• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by bbptech

  1. bbptech

    Turbo Build "UPDATED 12/22/2010"

    Here is the build so far: Z7 Crossover Z7 Downpipe with v-band Precision Turbo 6262 Manual Boost Controller MVS Wastegate Z7 A2A IC w/ 50mm BOV Braided Fuel Lines 65lb Injectors L26 UIM & LIM ZZP 304 Stainless Front Powerlog ZZP 304 Stainless rear Turbo Powerlog heres a few pictures: Im...
  2. bbptech

    Speed daddy headers fitment

    Anybody have or had a problem getting the slip joint on the front header to fit in the crossover? Mine is pretty hard to get to slip through so just wanted to see if anybody else has had the same problem and if so what the did to fix it.
  3. bbptech

    No brakes

    When bleeding the brakes, i step on the pedal then let off and it makes a grunt noise. They felt slightlly spongy with the car off. After starting the car i lose all pressure. so i picked up another EBTCM and a new master cylinder. Still the same thing. does this sound like i need a new brake...
  4. bbptech

    Which Headgaskets?

    which head gaskets do i use for a .030 over block? Im assuming stockers wont work so ill have to go the cometic MLS route. But when looking at them it doesnt say any bore size
  5. bbptech

    MOOG Sway Bar end links

    How do u install them? they really arent that straight forward and dont come with directions. Help would appreciated thanks.
  6. bbptech

    cradle bushings

    where can i get new ones? through dealer or?
  7. bbptech

    XP Cam setups

    Ok so if some of u read my other thread about another rebuild i have to do this is the new part of it. I am having the block built for pretty cheap. Its going to be honed, decked, hot tanked, new cam bearings, new connecting rod and main bearings, L36 rods and pistons, and XP Cam. I bought the...
  8. bbptech

    Another Rebuild

    So the noise ive always been hearing has not gone away even after using seafoam (thought maybe a sticky lifter). So i decided to take the engine out and go through it and see what the deal was. I knew it was any pulleys because i took all belts off and noise was still there. Also thought it was...
  9. bbptech

    16.4 LTFT at idle with E85

    All my fuel trims were stable and completely untuned when i started breaking in the motor. At 500 miles on the dot, i dropped the oil and put on a new oil filter with castrol syntec 10w 30 synthetic oil. Loaded her on the trailer and drover 300 some ot miles across the state to get it tuned. I...
  10. bbptech

    Header hitting sway bar and power steering lines

    like the title states. I know what ill do with the sway bar is flip it. but what about the power steering lines? these are zzp headers by the way.
  11. bbptech

    Exhaust Manifold Gaskets

    I can hear that i have got an exhaust leak but dont know where. What do u guys do to pinpoint where the exhaust leak is at? Also what exhaust manifold gaskets do u guys recommend using? I have ZZP Headers FWIW and am using the felpro gaskets. The material like stock head gaskets. Should i get...
  12. bbptech

    KR Problems

    So im having some problems here. Im getting a 3X reference circuit code and getting so weird KR. I changed my font Knock sensor for a new one because the plug wobbled pretty bad on it so i replaced that, put modded 1.9s on with 105's, put my EWP back on. I also put the stock timing table back in...
  13. bbptech

    NGK TR6 plugs

    people running them, which ones are they? i went in the oreillys and asked for NGK TR6's and they said well do u have a number for the plug and if i know if i want iridium ix's or some other one. thanks
  14. bbptech

    Gen V IC apart with pics. questions.

    Ok so i took my IC apart to reseal it with anaerobic sealant this time instead of RTV and found some things. In one section there is quite a bit of oil but in the other sections they are clean. Both the top and bottom plates there is oil in the that one section. should there be that much there...
  15. bbptech

    Modifying stock bin file.

    Ok so im just gonna take it upon myself to tune my car and use the Jerrys Notebook tuning guide thing. With the bin preparation stage 1 part, can i set the same things he is setting in torque management? or is he setting all the torque management more for his car because XP cam? Im running a...
See more
Back
Top