• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by alenw62

  1. A

    LIM gaskets replacement

    Doing the LIM gaskets on a 3.1 I am stuck getting the wire harness off the injectors so I can move the fuel rail out of the way. I have the locking tabs pulled up and pushed the release tab pushed in but none of the connectors will come off. What am i not doing right?
  2. A

    Transmissiom front leak

    99 3.8s/c had a real bad leak about 1/2 cup in 10 minutes Pulled the motor and changed the front seal. Put it back together and still have a leak but not as bad as before only about teaspoon in 10 minutes. I tried Lucas to swell the front seal some and had no luck stopping the leak. Where could...
  3. A

    Front seal replacement

    I had to replace the front seal with the transmission still in the car. Pulled the engine up far enough to get the torque converter off then removed the old seal. Driving the new seal in with the output shaft in place was hard but fashioned a seal driver out of a 3" to 1.5" pvc reducer with a 4"...
  4. A

    Transmissiom front seal leaking

    Fluid just pouring out of the transmission inspection cover, assume it is the front seal has failed. Question pull engine and leave tranny in or leave the engine in and drop the tranny out of the bottom to change out. While I am in there what else could be leaking, do not want to put it back...
  5. A

    Temp gauge green wire

    99 GTP the green wire from the temp sensor plug on top of the front valve cover goes into the wiring harness, The black and yellow go to the PCM the green must go to the engine bay fuse box to get to the instrument panel which pin does it go to.
  6. A

    young couple at junkyard

    So I am at my local pick and pull yard it is 95 today and I have my parts waiting to check out. there is a young couple in front of me both soaked in sweat and covered in grease and grim. I ask the young man have you married her yet, he looks at me funny and she has a big ass grin on her face...
  7. A

    How to change the regulator with window down

    So the motor is out on the drivers side window, how do you get the glass out with the window down all the way.
  8. A

    power steering high pressue hose

    Installing high pressure power steering line got the end on the rack already The problem is getting the pump fitting lined up right which way does all the excess hose go to get the fitting to line up right.
  9. A

    98 GTP parting out going to scrap yard soon

    I have a 98 gtp black tan interior that will go to the scrap guy in a few weeks. Engine, trans, engine wire,harness, radiator and exhaust are gone. Located in NW Georgia but this was a northern car for its whole life so the underside is pretty rusted underneath, that is the reason I swapped the...
  10. A

    Wire what is it for

    1998 GTP plug comes off the engine wire harness up front splits where the coolant sensor plugs in then goes behind the battery and plugs into a plug that goes up front to the left head light. what is it for.
  11. A

    Wiring help needed

    In the engine bay fuse box can someone tell me what these pins go to, this is on the middle plug (orange on the 1998 GTP). Pin B1 wire color Grey Pin C2 wire color yellow Pin D8 wire color green Pin E8 wire color 2 green wires Pin F3 wire color Brown/White maybe Change oil soon? Is it possible...
  12. A

    Sensor question

    There is a sensor that is in between the trans and engine the wire goes into the wire harness that connects to the back of the power steering pump. What is this sensor for the wire broke off up in the wire harness some where. I need to run a new wire.
  13. A

    VATS after engine swap

    I put a SC 3.8 into an SE along with engine wire harness and computer, will I need to just do a key relearn or swap the ignition cylinder over to the SE so the computer and key match.
  14. A

    Engine bay fuse box

    Does anyone have a wiring schematic of the engine bay fuse box for a 1998 GTP and a 2002 SE, I put the GTP motor in the 2002 SE, I want to make sure I have the wiring correct before I hook up the battery.:th_thumbsup-wink:
  15. A

    98 GTP motor to 2002 SE body that had a 3100 motor

    I have both motors and trannys out looking at what I need to swap over so here are my questions. 1 Engine bay fuse box, took engine harness out with the 98 motor use the 98 fuse box in 2002 body or stay with 2002 fuse box. 2 Rack and pinion 98 has wires going to it from the engine harness 2002...
See more
Back
Top