• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by 91parkave

  1. 91parkave

    Fortune Auto radial bearing install

    I don't feel like typing so here you go. https://youtu.be/o7xdyH0-NFw After a quick drive these are well worth it for coilovers guys.
  2. 91parkave

    LS3/7 Gold blade TB

    As some you may know already, these can swapped as well in addition to the truck throttle bodies, I am only posting this so that any myths about the TB blade opening reverse causing issues can be dismissed. If your in the market i suggest these throttle bodies over the silver blade any day, ill...
  3. 91parkave

    ZZP Control arm sway bar link mod

    Well for guys with these control arms, we all know your sway bar will not be level due to the provided spherical rod bearing height, maybe if your dway has been flipped you might be able to achieve it being level. However itsnt a practical solution for everybody, but for 12 bucks and a trip to...
  4. 91parkave

    subframe mount interchange

    Curious if anyone knows rather all aluminum subframe mounts rather it'd be for a impala grand prix etc... can be changed. I'm looking into utilizing 9c1 impala subframe mounts on my gxp. Gxp lists as sport mounts but the only firm ones are for the impala.
  5. 91parkave

    monster trailing arm upgrade **cheap**

    Ok gp family, for a cost of 21.99 per arm and a couple of bushings you can have trail8ng arms that surpass any upgrades currently available. If you have a tractor supply or cal ranch store near ypu then these are readuly available. All others must order them. Parts list of what youll need 2x...
  6. 91parkave

    F body rear bar fail pics

    As promised I went on a internet hunch/peer pressure and ordered the 3rd gen rear 23mm sway bar. To my door it was 70 and change. Came in black powder coat. Very nice piece.later this week I'll throw the car on the stands and make this my *****.. Here are the pics Where it would sit on the...
  7. 91parkave

    Spherical bearing upper mounts

    Just wanted to share my newest quest to improve handling. First i tried out the pillow ball camber plate deal, which was great but i need to do add'l engineering on keeping the strut assembly moving freely without binding. So for now im on new factory mounts, which maintains a good stack height...
  8. 91parkave

    Running e85 on stock fuel system

    These are the tables im reffering too. i understand 3800pcms are very basic compared to per say LSX PCM's however as said earlier i know that every injecotr set reacts diffrently to vacum, ign voltage and has a effect on its overall performance, Im not doubting your work over the years, im just...
  9. 91parkave

    Custom front engine mount V2.

    So finally got around to getting the front made the way i wanted it. The local fab shop is also intrested in doing more of these if i can bring in enough people. The mounts use a 2 piece Poly bushing, and the mount itself is 2 piece. For the future though we would like to use either honda or...
  10. 91parkave

    Converting to AN Fittings trans lines *Updated*

    *update* I made the switch over to 1/2inch Lines now for the cooler or -8 AN line. Setup is working great with the increased fluid capacity and flow potential throughout the system. on avg i dropped another 5-10 degrees while doing normal driving. This time around i used pushloc fittings but...
  11. 91parkave

    Glowshift oil cooler sandwhich plate installed

    Got this sandwhich plate installed to get rid of the drill tap job i did on the oil cooler block off plate. This unit is verynice and comes with everything needed for your install minus what you need for putting a oil pressure sensor in. this block comes with 4 x 1/8 NPT oil ports.you can...
  12. 91parkave

    Thoughts on stich welding strut towers etc..

    i noticed now that gaps in areas on the body panels are growing as the car gets older coupled with stiff ass suspension, im sure it will only get worse as time goes on. So ive Been doing some research on this, and seems to have pretty good results on unibody cars, my main concern was stiching...
  13. 91parkave

    AFR and Timing Tuning (02 Regal GS 223k!!!)

    look in the screen shot i posted with the formula next to filter theres a blue question mark symbol. click on that. it brings up all available PID's. for your scan click where i showed you to highlight the table then in your tune open your maf (or VE depending on what your doing) table and...
  14. 91parkave

    FS: glasspack mufflers with stainless tips

    My old setup for sale oval tips. Asking for 80 bucks + shipping. Mufflers are 3" in and out but have 2.5 inch adapters welded in. Tips are stainless ovals 2.5" inlet. Items located in arizona
  15. 91parkave

    held coilover mounts

    Anybody have any close up pics of the mounts held makes? Thanks in advance
See more
Back
Top