Thread: WTB: MAP sensor vacuum hose or vacuum tees

During the lim change I broke a vacuum tee. It still goes on the manifold but since I broke it it seems to barely be on there. It doesn't idle funny but I just don't trust it. So yeah I'll take whatever you got either a tee or the whole line. Don't think it would cost too much and some guys on here probably have a few just laying around in their garage. Let me know!

run down to advance auto, find a 2 pack of small white t's, they cost 2 bucks. then get 4 inches of vac line, put a inch or so of vac line on all 3 ends of the T then push the vac line over the stock plastic lines, and on the lim port.

done for about 3 bucks today.

you can see the 2 new T's i put in when i broke all my stuff doing the lim.

did the fpr, and the port under the snout with new t's. and replaced the vac lines with new lines.

Will the stock hose fit tightly into that new type of line?

sure will. the map sensor stock vac line is pushed into the side of the T you cant see in my pic.