|
|
03-21-2013
So, I decided to go easy for my first "mod", plus I really liked the look of it. Got the following oil cap off of Ebay IMG_0568.jpg The original cap is properly situated. IMG_0564.jpg So, does anyone else have this oil cap? Is the L67 part just a sticker? If so, can it be taken off put back on properly situated with 3M double sided super sticky tape? or do I call up the seller and ask for a different one?
03-21-2013
Wow that sucks. Someone didn't get their coffee and donut that day.
I don't have one but I'ld probably try prying first with a razor blade to catch the edge then get under it with a putty knife. Scrape both sides,sand a little bit, use some gel super glue and reposition.
Doesn't really answer your question but if all fails, what the hell
03-21-2013
Meh, contact for a replacement first... if they give you a hard time try fixing it yourself. If you cant fix it yourself open a claim on ebay, as long as they advertised that it would face forward correctly. If they didnt specify that I think you might be SOL as far as a defective or false advertising point because they never actually said it would face frontways when screwed on.
03-21-2013
You do realize that all you need to do is remove the cap and start threading it in a different position right?
03-21-2013
The caps have the key way in the remember?Originally Posted by txslow6
03-21-2013
What he said. There is only ONE position it will go in, it is not threaded, but rather it is keyed.
03-21-2013
steam the sticker off as to not to ruin it. replace
03-21-2013
Was I the only one that wants to ask. Was this from the ZZP store?
03-22-2013
did you buy that used? i bought mine new off ebay, the sticker came with it, but it was not attached. the instructions said to install cap then place sticker.
03-22-2013
Who need's those???
Lol
03-24-2013
Actually, the sticker was not even attached, but just semi stuck in place by a tiny amount of gook. I pulled it up, cleaned the surface, installed the cap, and then installed the sticker as per the unneeded instructions. Now all is well in fancy oil cap land.IMG_0570.jpg
03-24-2013
Nice, disaster avoided today, good job Sir.
03-24-2013
You always need instructions, because sometimes its the only way to get the charcoal for the BBQ to light
03-24-2013
Next mod is LED Tail lights. Just waiting for them to get here.
03-24-2013
Those are a piece of cakeNext mod is LED Tail lights. Just waiting for them to get here.
03-25-2013
Yeah the tail lights are easy, unscrew finger tabs then install new light. Takes about 15 minutes tops
03-26-2013
if they dont light up, turn the plug around, and yes you can do it backwards...
03-28-2013
Take photos of the tail lights when you get them installed
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
