Thread: Lets see them guages !!!!!!!!

A simple google search would've found it.

Stewart Warner Maximum Performance Series Analog Gauges 214536 - SummitRacing.com

^ I believe it's from a limited edition Grand Prix probably eBay is your friend.

Originally Posted by Doug 97 gtp

What kind of boost guage is that ? and does it light up red

Its an Auto Meter Carbon Fiber Ultra-Lite and yea it lights up red but you can change it.

Originally Posted by camopaint0707

Anyone know where to pick a 4 gauge pillar pod?

you have to make your own There is nothing out there that contains 4

camopaint0707, Theres lots of room, n its not hard to put any type of gauge down there!

Originally Posted by 97gtsc

Originally Posted by 2003 SSEi

Bonneville FTW

Originally Posted by Bronco Boy

Nice! How do you hook up 4 Aeroforce's?

Bueller? Does the owner of this know? Be it 4 or 5 gauge's.

I know how it's done. We discussed it when he was doing it. How's your soldering and fab skills? That's how it's done.

Here's mine. Still have it






Here's me showing off the monitor on the dash of the Bonne. GP's got hosed bad on everything. Bonneville came with a stock boost gauge that read -10 to +10 lbs, and a stock oil pressure gauge. I was pulleyed and well over that +10 psi, 2003 SSEi gave me the boost gauge in the pics, swapped my cluster to one with the alt gauge and ran the seperate boost.


To answer you guys asking "how did you do that", here's a little information. While the Bonne is the better, cooler and comfier car...nothing aftermarket was hardly made for them. It's fab time. Round up your skills, talk to a few guys that have done mods of this sort and you'll find the actual interior paints, etc etc.

Mock things up and tape them together. Then lay some fiberglass etc. (Literally I glassed this in the car.)


Cut..shape...it's all part of the process (so is planning one gauge and then adding two more.)











Fit, test, add...rework, reshape


Realize how ugly it's looking and keep on going






Check against a sun faded pillar


And for Pat... Lake Bonneville!

You find out little things about pods when you build them. Like...having gauges on your dash in the sun.. not the ideal place. The aeroforce would have to cool to be visible. After that, I used a sunshade.

im thinking of mounting an aeroforce above the stering wheel like gtpsleeper.

Originally Posted by BillBoost37

I know how it's done. We discussed it when he was doing it. How's your soldering and fab skills? That's how it's done.

My soldering? It sucks. LOL

I was jut curious, because before I got my AeroForce I had an Edge CTS, and I wanted to try and run them both. My research told me that OBD2 could only read one thing at a time.