Door Molding Glue

[logan809]

I'm going to be replacing a driver side front fender soon and to take it off I see you have to take off the bottom molding to get to the last two bolts of the fender. My question is once I remove the molding, what is a good adhesive to get the molding to stick back in place?

[tc300]

Mine has started to pell off on the pass side... Got some 3M superstrength molding tape. Part number 03615

Doesnt seem to sticky tho..?? Hope it works. Was told by a friend who does autobody to take some type of adjustable clamp to pinch it to get a good stick. Put a towel in between of course so you won't scratch the paint! Lol

[tc300]

I'm going to get to it today since the weather will be nice out. Hope it sticks good

[logan809]

Alright lemme know how it turns out!

[burgundybullet]

3M double sided molding tape is what ive used to reapply some badges and its working great for me. It should work for what you are trying to do i would think.

[logan809]

Yeah cause if I can get away with only peeling back a foot or two of the trim to get to the fender bolts the tape should be fine

[tc300]

Alright lemme know how it turns out!

Ok... It worked GREAT! Lol. Be careful cause that stuff sticks pretty damn good

[tc300]

Also i got the stuff that is a tad bit to wide.. Had to cut n trim it a lil..

[GTP in RTP]

tc300 did you get the 7/8 inch size ? should I get the 1/2 instead ?

[lrscgod]

NAPA sells good moulding tape, it worked good for me