Has anyone ever tried to remove the stickers on the visors?? I attempted to do the driver side one since it was falling off... but it left a bunch of glue stuff behind. Any advice or anything?
before
after
|
Has anyone ever tried to remove the stickers on the visors?? I attempted to do the driver side one since it was falling off... but it left a bunch of glue stuff behind. Any advice or anything?
before
after
only thing i can honestly think of (I HAVE NEVER DONE THIS) is to remove the entire visor assembly, and take like a carpet brush, and some sort or cleaning solution, and try brushing it off, looks like it would come out that way
Heat gun, rubbing alcohol, putty scraper, & shop towel..
mine came off my 1997 no problem. Left no sticky stuff behind...just a slight outline visible where the sticker covered...was smooth, while the rest of it was a little roughed up from average use. You have to look for it to see it on mine.
~F~
i did it to mine. I used stuff we have at work called pro-solve worked well. Used a heat gun at first and tried to get as much off as possible but that didnt work
Hair Dryer and any citric based cleaner should take care of it.
Screwdriver
I just some off a second set of ones with a heat gun, and razor blade (something with a pointed edge).
Heat up the sticker with the heat gun on low setting at least a 10" to 12" away, and disperse it evenly. If it flakes off you got it too hot. You need to make sure the sticker is still elastic. After the sticker is removed, you can rub your finger over the left over residue if its still warm and should peel off. I had no issues when doing mine that I did like two weeks ago.
Make sure you're fingers/hands are clean when ur rubbing off the left-over residue, or else your visors will stain. (Ignore me if you have black interior)
« Previous Thread | Next Thread » |
Tags for this Thread |