|
|
03-14-2012
I'm going to be replacing a driver side front fender soon and to take it off I see you have to take off the bottom molding to get to the last two bolts of the fender. My question is once I remove the molding, what is a good adhesive to get the molding to stick back in place?
03-15-2012
Mine has started to pell off on the pass side... Got some 3M superstrength molding tape. Part number 03615
Doesnt seem to sticky tho..?? Hope it works. Was told by a friend who does autobody to take some type of adjustable clamp to pinch it to get a good stick. Put a towel in between of course so you won't scratch the paint! Lol
03-15-2012
I'm going to get to it today since the weather will be nice out. Hope it sticks good
03-15-2012
Alright lemme know how it turns out!
03-15-2012
3M double sided molding tape is what ive used to reapply some badges and its working great for me. It should work for what you are trying to do i would think.
03-15-2012
Yeah cause if I can get away with only peeling back a foot or two of the trim to get to the fender bolts the tape should be fine
03-16-2012
Ok... It worked GREAT! Lol. Be careful cause that stuff sticks pretty damn goodOriginally Posted by logan809
03-16-2012
Also i got the stuff that is a tad bit to wide.. Had to cut n trim it a lil..
05-19-2012
tc300 did you get the 7/8 inch size ? should I get the 1/2 instead ?
05-19-2012
NAPA sells good moulding tape, it worked good for me
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
