Thread: Boostjunki3: Help

Im wondering what kind of weather stripping u used on your halo projections? And other things u did to solve the bounce.

Thanks,
bbptech

ya ive done that mod and it still bounces some. seen boostjunki3 did some different weather stripping on the housing and it fixed his prob. the bounce just gets annoying since i have HID's

you get weather stripping at pretty much any auto store, get the thinnest possible and put it under the projector

Alright thank u. Any other things u guys did?

i havent done the weather stripping, mine dont bounce...but the weather strippng should help alot

im hopin so. Ill keep u posted. thanks rocafella.

no problem, just dont ask me how to install hids!!

i fail everytime

just get automotive weather stripping from home depot and rip the original bull shyt off the corners too and wrap the corner and whole underneath of the light with the thicker stuff....another thing i did to get rid of the gap on the inside in this pic below is i grinded the mounting bolt holes for the head light back and in so the light is firm against the frame and further in to get rid of the ugly gap on the inside edge of these lights (thats no pictured here ill get some today or will try)

heres what i was talking about see how i enlarged the hole up and in....i just drilled another hole really close and grinded out the the piece between the holes then painted it so it wouldnt rust.

it will lower the headlight minimally but not gonna do much ....

took alot of trial and error to get these bounce free

Hey BoostJunki: I cant find the weather stripping. Everywhere i look, none of it is the right stuff.

should i see if mine bounce first before i do this?
and where did u look bbptech?

i got the stuff from walmart, its 3/4" wide and 1/2" thick,
will it work?