|
|
02-06-2009
i have a question for anybody that can help i have a 02 GTP and am looking for bigger rims well i cam across a set of factory rims off a 1998 Corvette for a good deal and i was wondering if anyone knows would they be a direct fit for my 2002 GTP or would i have to do sumthing thank you
02-06-2009
no they have a different lug pattern.
02-06-2009
X2...different bolt pattern
02-06-2009
x3 =]
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
02-06-2009
Even if they didn't the are most likely way to wide for the GP... lots of rubbing
02-06-2009
Really what would be the widest for the gp that i could go. n i see you live in hoffman i live in palatine.Originally Posted by 02BlueGT
02-06-2009
what do u mean x3 smily face
02-06-2009
I was doing some diggin and the bolt pattern for those Corvette wheels are 5x4.75 which is not the same as ours. Also it looks like the stock wheels have 17x8.5 in the front and 18x9.5 in the rear. Not sure how good that would look. Plus a 9.5 rear might possibly have rubbing issues depending on the backspacing, which I could not find.
02-06-2009
Yea i was thinking the same about the look but was gunna play with em but sence i cant i wont. thank you for your help, wait would Z06 rims work, or no
02-06-2009
Different bolt pattern as well. Vettes use a 5x120.65mm offset while GP's use a 5x115mm. Plus the offset is made for RWD rahter than for FWD. You can get away with a 9" on a GP. I have seen a few guys run 18x9 mustang wheels. It might rub but a little fender rolling would help that.
02-06-2009
He means he agrees with the two other people about it being the wrong bolt pattern. And, well, smiley face.
02-06-2009
x2
02-07-2009
X3?
02-07-2009
Nice, there are a lot of locals, check out The Chicago Garage for local meets and such
02-08-2009
the widest youre going to want for wheels is 9". even those you have a high probability of rubbing unless you roll your fenders.
04-18-2009
we can't buy a new bolt pattern? haha
04-18-2009
unless you get an aftermarket set that are 5x114.3 or 5x115.
04-18-2009
I'm talking like an adapter plate so i can bolt up the C5 wheels
04-19-2009
im sure you could...but why? you could probably find a wheel in the right bolt pattern that looks pretty much like them.
04-19-2009
yea, i have been looking.... if you see anything that looks it, let me know
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
