• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

KR Issue

BoostedPontiac

BoostedPontiac

Regal GS Level Member
Ive been having a bit of a KR issue lately ie max of 4* around 80% throttle.

Mods:
3.4 Pulley
9.4 to 1 compression
XP Cam
3" DP
ZZP 3" Exhaust
Intake
AL 104 plugs @ .050
Pump 93 octane

I have not installed the headers yet, but i planned on doing that Monday
Im thinking that i dont have enough exhaust flow for a 3.4 but i need to be sure.

Any suggestions?
 


headers are the worst possible mod you can do on a 3800.

What AFR/timing are you having problems with? High compression stuff might want to see 13-14 degrees on a setup like this.
 
notdarkhorizon said:
headers are the worst possible mod you can do on a 3800.

What AFR/timing are you having problems with? High compression stuff might want to see 13-14 degrees on a setup like this.
Click to expand...
First, Why are headers terrible?

Second, My solution was to use eddies table modifier to lower timing as a band-aid until i can get the exhaust flowing more.
 


the factory manifolds and old factory mufflers are the worst for flow.

lost 2 psi of boost from ditching the factory mufflers and exhaust. on some cars i could see it being worse since the baffle holes rust and close up before the baffles rot away....

good luck having muffs that the baffles have rotted through yet the muffler case hasnt lol

the borla exhaust sounds great but its a helluva restriction...i have back to back dyno tests that show the boost drop and going lean as hell from a beautifully tuned setup with the exhaust connected, to a 18" 3" straight pipe.

317 at the wheels with a stock cam build
 
Headers are the worst mod? Maybe I need to put my stock manifolds back on my G8 and my GTP. I will miss the added noise and speed tho. LOL
 


You must log in or register to reply here.
Back
Top