Or we can just go in on a new puller and split the cost?
|
|
12-28-2009
Or we can just go in on a new puller and split the cost?
12-28-2009
So Stefan, what you have planned for the prix?
12-29-2009
You should be able to use a hardened bolt, with a nut and a big, thick flat washer and install it like a power steering pulley. I think I might leave the snout off and put it in the freezer to simply installation.Originally Posted by Toofastgs
Im going to make my own pulley remover out of 1/2" steel, I have a torch, a grinder, and some tap's. When I get some spare time, I might make one, and see if any of the members here want to try it out. I keep yall updated.
12-29-2009
This motor, not too much.. 1.9's, headers, 3.5/3.4 pulley. Going to pick me up a L36 or L32 Block if not whole engine, then build from there.. Not sure on the new motor yet...
Last edited by Ibwrong; 12-29-2009 at 09:50 AM.
12-29-2009
Where you around when i had my full build? I dont remember.
12-29-2009
On the GP.. yeah I was.. that was a nice build.. Im going to be looking for pointers getting everything up and running.
12-29-2009
You on AIM? if so send me a pm
12-29-2009
Turbo's don't have pulleys!I thought Kent had a puller a couple of years ago?
12-29-2009
You didnt always have a turbo. but then again I think you had a GT right? I was thinking about someone else, sorry.
12-29-2009
Im back
12-29-2009
Welcome back, hell we might even have about 20 members in OK now.
12-30-2009
wow were starting to come out of the woodworks!
01-01-2010
Greetings all, I'm here in Shawnee, OK. Would be interested in some kind of meet in mid or late Jan...
Also, is anyone know where the closest / best track is?
01-02-2010
Thunder valley raceway out in noble.
01-02-2010
TV is an ok track (unless they made some improvements)
What i hated was the very short turn offs
It seemed to start to go up a slight hill at the end
And last few times i was there they never prepped the track
Tulsa raceway park is mo better (official NHRA track)
Got 2/4 miles + a 200' sand trap to stop
Prepped
But again i have not been to TVR in years and things change.
01-02-2010
I love the Tulsa track.. We went right after it was rebuilt with Will and it was awesome. When I get ready to run my car again, it will be in Tulsa..
01-04-2010
Im still around. I just dont show up much as often.
I have a pulley puller, but it would be some time before im back int Choctaw, and i broke a piece last time (only time) i used it. may be able to work something out.
01-05-2010
Im in the process of installing the pulley, I have about a 1/4" to go and it wont move, its the zzp 3.5". Im about to take the snout off and take it to a machine shop to see if they can press it on. I need to get this car running, my wife has been out of a car for two weeks.
01-05-2010
We need to start talking about a meet.
Also need to start passing around cell numbers. I finally after years with out one got a cell
01-05-2010
I have a pulley puller here. If your up for the drive I will install/remove pulleys for FREE, ya I don't charge for this myself.
We'll have to get together all of us when the weather gets a little nicer. Probably only about 3 or 4 of us from Kansas would actually come anyway, nothing like the number we could have.
There is a pretty good Mexican restaurant I ate at in Ponca City, across the street from the Wal-Mart there on Prospect. An idea anyway. Unless the guys in Missouri, or Topeka would like to partake in our get together, no way in hell would they want to drive THAT far tell ya now.
~F~
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
