Pe afr level questions

So I've been tuning my 04 comp g using table modifier and dhp

My mods are 3.4 pulley, lq4 maf, 42# injectors, 1.84 rr, 4" airaid intake with aem dryflow filter, and sd headers.

My aeroforce is showing 0 kr, my base pe afr is set at 11.5. But I can't my wideband to go any lower than 12.3 at the hit of wot and it creeps to 12.9 at 5800 in 2nd gear. Still 0 kr all the way through.

I'm just wondering how to get the wideband to get down to 12.0 all the way through wot pulls, so I can start to add timing

I'm seeing 0 kr all the time during wot

Adjust your MAF table.

You need to add fuel, the only way to do that is through the MAF.

Add 5% atleast to start with. See what the AFR does, then go from there to match your commanded AFR while in PE.

Ok I'm going to try that. Has anyone ever got the wideband tab in table modifier to ever work

i just have my wide band input thru egr and then use table modifier to display egr volts. and i can see my wide band.

Any update on this thread with that AFR? What worked for you?