Thread: E85 startup tuning???

Hi all

I have my E85 tune all set, very low knock and trims are good. I am having random starting issues when I startup in the mornings. The temperature is around 70 here in the AM. Is there a way to scan and tune just for startups? Any help is appreciated.

Thanks

Try adding some fuel in "Startup AFR Correction". E85 likes a rich start. May need to mess with Decay but I haven't messed much with that.

What AFR are you seeing on wideband when you first start it?

Also if your MAF table is off in your idle area it will affect your startup. I'm not 100% sure on your year but on my car maf controls about everything. I don't think the VE table does diddly. Just backup for maf failure.

My startup is pretty decent, about 2 seconds to start. It used to be 5 to 10 seconds before I tune the idle area. Only thing I'm trying to figure out is how to get it to stay in open loop a little longer on startup. When it jumps to close loop too soon the computer starts pulling timing to get the idle under control. Makes it run just a little rough.

Yeah probably not super accurate until the sensor warms up. Takes a few seconds I imagine. But you might be super rich in those MAF cells. I knew I was because my iac would be wide open making a loud sucking noise. Do dbw cars have an iac? Try leaning it out in idle cells and below.

I wish hpt would add more tables. I check after every update. Doubt it's ever gonna happen.

Yeah, and I lost my DHP tuner...think someone threw away the bag it was in Was pretty bummed to realize that. Still hurts to think about. But I still have no idea how you would find the "address". That's like coder talk.

Lol. It's great software but yeah. Well, their scanner is nice. Wish I still had my DHP for tuning though. Also I love how hpt has promised to release all these new pro features since before the mpvi2 came out. Still not a word about them. Standalone tuning would be nice, and wireless flashing. And the hub with all the inputs.

Well I feel it's time to give this project up. When I give it gas on the highway 5k RPM and up it jumps and skips around dangerously. Also, some mornings it takes 5 minutes to start but then starts perfect the rest of the day. I'm going to just drive out all the e85 gas then take off the 60# injectors, 3.0 pulley, 85mm maf, belt wrap kit and sell it all.

Ill contact ZZP to see if they have the file. One thing I was looking at my LTFT from my last scan and they were positive. Most +16. Which is very lean. Can someone please link how to change that with HPT. I've had brain procedures the last 4 weeks so I have a hard time remembering anything. Any help is appreciated.

I'll try a few multi by 1/2 tunes and see if they some down. if they don't then I will look for leaks. I highly doubt there are any leaks.