Thread: What do i do first?

Results 1 to 5 of 5
  1. #1 What do i do first? 
    GTP Level Member 04lss's Avatar
    Join Date
    Sep 2014
    Location
    Richmond Virginia
    Posts
    962
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    I ordered HP Tuners. It should be here tomorrow. I want to tune the car for an e50 blend because i have e85 available locally, and I have KR on my current setup. Once I get some bigger injectors, I will go full E85

    Currently im running a blend around e30. and im still seeing KR. (mods: DP, 3.5, 180tstat, K&N drop in, Autolite 104s)

    What I am trying to figure out is what to do first.

    1. use the method in the Ethanol tuning guide to set my fueling ~115%, THEN work on tuning the car, dialing in timing, fuel trims etc.

    Or

    2. Get the car back on pump gas, deal with timing and fueling, THEN switch it over to e50, and fiddle with timing etc.


    FWIW, im seeing ~3* KR at wot, and some odd spikes at lower boost/ rpm. on pump gas 93, im seeing 7-8
    2017 GTI 6mt 320whp 400wtq , 2012 Volvo S60 T6 300hp of Swedish safety, (Sold) 2019 Ford Mustang GT. 460 screaming eagles. 2004 Buick Regal GS "Gramps" Intercooled, corn fed, ported g3 m90, 1.9 rockers, 80# injectors.
    Reply With Quote  
     

  2. #2 Re: What do i do first? 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,701
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    first thing I would do if you want to get rid of the kr is see where the kr shows up, then pull timing from those cells.

    I would use the cylinder gain method to tune for the E50 ish or whatever you want to run. scan for injector duty cycle and see how much headroom you have with your fuel, then if you aren't at 100% IDC, up the ethanol percentage. I bet you can run full E85 on stock injectors with a 3.5 pulley, but the only way to find is to try it.
    Reply With Quote  
     

  3. #3 Re: What do i do first? 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,972
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    You probably can run a 3.5 on stock injectors with e85. Even if your idc does hit 100% or more, it's still not the end of the world. They can still supply enough fuel.
    Reply With Quote  
     

  4. #4 Re: What do i do first? 
    GTP Level Member 04lss's Avatar
    Join Date
    Sep 2014
    Location
    Richmond Virginia
    Posts
    962
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    I think im on about a 30% blend right now, and my IPW was 17ms I think? it goes to 25. if so, that gives me a solid 30% overhead (is there any way to see a percentage in hpt?)

    I wonder what kind of pulley i can drop to once i get injectors.
    2017 GTI 6mt 320whp 400wtq , 2012 Volvo S60 T6 300hp of Swedish safety, (Sold) 2019 Ford Mustang GT. 460 screaming eagles. 2004 Buick Regal GS "Gramps" Intercooled, corn fed, ported g3 m90, 1.9 rockers, 80# injectors.
    Reply With Quote  
     

  5. #5 Re: What do i do first? 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,972
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    Ipw by itself means nothing.

    You can scan idc with hpt.
    Reply With Quote  
     

Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •