Thread: 1965 Chevelle Malibu - The new "family" hot rod.

Page 1 of 4 123 ... LastLast
Results 1 to 20 of 62
  1. #1 1965 Chevelle Malibu - The new "family" hot rod. 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    New project time!

    I made the decision a while ago that I needed to build a "family" hotrod. My 3 trucks are cool, but I want to roll with my whole crew. This new potential hotrod had to meet 3 criteria;
    1.) Seat 5
    2.) Be older than a 1967
    3.) Be a GM product

    I have been looking on and off for a while when just yesterday this thing popped up on Craigslist. I jumped on it. The car was listed for exactly 38 minutes when I contacted the guy and I was on my way to his house within the hour. We talked for a good 45 minutes about anything and everything. Eventually settled on a price and I handed him crisp $100 bills. The guy was nice enough to deliver it for me today. Here it is, as it sits:



    That vintage 60's color!


    50k original miles?


    For sure the original 283 / Poweglide setup


    Always a southwest car. It's insane how solid this car is


    It needs a little maintenance. Been sitting for probably a decade. The left rear wheel cylinder leaks, but that's the only immediate issue. Short term plan is to convert the front brakes to disk. Drum brakes SUCK! Apparently factory '67 or '68 disks are a nearly direct bolt on swap. I'll get that stuff coming soon. Also probably switch to an HEI distributor and ditch the points. Maybe drop on a 4 bbl intake and carb. Depends on if I find something cheap at the swap meet. Beyond that, I plan to drive it just as it is and address any issues as they pop up.

    Long term plan is LS swap and turboooooooo! This is the reason I wanted Pre 1967. No emissions!
     

  2. Likes idrivejunk liked this post
  3. #2 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,701
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    I am kinda surprised that Arizona has emissions for 1967 and newer because I thought it was 1974 when they started adding catalytic converters. I guess that doesn't mean they can't have emissions prior to that year. Also, in my opinion 1967 was a really good year for GM as far as styling goes. Does it have power steering? the '67 Caprice I had drove like a dream because it was so smooth. I'm really excited for you that you got this. Are those wheels 14" or 15"?
     

  4. #3 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    GrandPrix Junkie idrivejunk's Avatar
    Join Date
    Jan 2014
    Location
    AR
    Posts
    4,913
    Thanks (Received)
    4
    Likes (Received)
    32
    Dislikes (Received)
    1
    Congrats on old car!

    That should provide ample honest retro vibe for sanity preservation. I'm happy for you so will spare you the rambling opinionated, former low mileage 283PG user input. I tend to just kinda check out when I see all four doors.

    From where I sit, the miles are believable. Garaged it just in time, looks like to me. In certain circles, theres a heap of bragging rights in contact points. Whatever you do, just don't think you'll be able to make the PG give up the ghost as an excuse.
    All Grand Prix, all the time. 69 Model J, 99 GT & GTP coupes. All junk, haha.
     

  5. #4 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    Quote Originally Posted by SgtMarshal View Post
    I am kinda surprised that Arizona has emissions for 1967 and newer because I thought it was 1974 when they started adding catalytic converters.
    '75 I guess. I'm not sure why they start in '67 (or '68?). I have to believe anything BEFORE '75 gets a lot of leeway though. Can't say for sure. Anyway, not my problem!

    Does it have power steering? the '67 Caprice I had drove like a dream because it was so smooth. I'm really excited for you that you got this. Are those wheels 14" or 15"?
    Yes, and it is butter smooth. Early GM power steering was/is effortless! Factory 14's. The seller said they are some special factory option though. Supposed to be the only 14 that will fit over disk brakes. We will see.


    Quote Originally Posted by idrivejunk View Post
    Congrats on old car!

    That should provide ample honest retro vibe for sanity preservation. I'm happy for you so will spare you the rambling opinionated, former low mileage 283PG user input. I tend to just kinda check out when I see all four doors.
    Thanks! Hey now, don't be hating on my more door Malibu. I have to have SOME amount of practicality. It may hurt the cool factor, but it will be way more convenient with the kids. Still better than a minivan!

    From where I sit, the miles are believable. Garaged it just in time, looks like to me. In certain circles, theres a heap of bragging rights in contact points. Whatever you do, just don't think you'll be able to make the PG give up the ghost as an excuse.
    Haha! No, probably not. Yeah, I think the patina is perfect right where it is.


    So it looks like this thing might come together quicker than I had planned. I sold my V8 S10 for near asking price yesterday, so this build is already funded. Earlier in the day I got my title, tags and insurance for the Malibu. My custom plate was even available. I stumbled into a 5.3 for dirt cheap, and I already had an 80e on the shelf from a trade I had done a while ago. I'm going to start squirreling away parts and pieces as they become available. Things are just falling into place.



     

  6. Likes Scottydoggs liked this post
  7. #5 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    Been putting in some time on this thing. In the last few days I've replaced;

    All 4 wheel cylinders
    Battery hold down
    Both battery cables
    Fuel pump
    Driveshaft seal
    And rebuilt the carb.

    I ordered a full front power disk brake conversion kit from CPP through Summit, but that wasn't supposed to ship till 2-2022. This is why I even bothered to replace the front wheel cylinders. I also ordered a new master cylinder since it leaks like a sieve. A day after I ordered the master, I got a shipping notification for the brake kit. That should be here tomorrow. Shrug. Anyhow, that will be the next project. Then maybe I can start driving this thing.

    Oh, I got my custom plate the other day too:

     

  8. #6 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,701
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    I like it. some people might get tricked by your license plate and think you are an environmentalist, but that's ok. we know the truth.
     

  9. #7 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    Quote Originally Posted by SgtMarshal View Post
    I like it. some people might get tricked by your license plate and think you are an environmentalist, but that's ok. we know the truth.
    Maybe I can get an "Alternative Fuel Vehicle" tax credit if I run it on E-85. Haha!

    Found out today that the car does for sure fit in the garage. Barely, but it does.



    Just in time too. First major project got dropped off today. Early Christmas! Let's see how long it takes for this instal...



     

  10. Likes Scottydoggs liked this post
  11. #8 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,701
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    being able to stop is a nice feeling. and being able to fit your car/truck in the garage is great. my truck fits in the garage now, but it's tight as well. I can't remember where I heard E-85 doesn't have emissions, so I don't necessarily know if that's true, but it wouldn't surprise me. I say increase the jet size like 30% and go for it.
     

  12. #9 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    Disk brake kit is on. Instal was pretty straight forward. The only things not in the kit that I purchased separately were the prop valve bleeder tool and the brass distribution tee. Shipping on that took FOREVER. Anyway, the brakes work, but the pedal is soft. I think there's still air in there somewhere. Going to try the vacuum bleeder and hope for the best.
     

  13. #10 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    This is normal, right? This is fine.



    Probably not, but it does explain the loud bang and immediate wheel lock up last time I drove it. I put new rear shoes and hardware on today. Now every consumable part of the brake system is new. The only original parts are the pedal and hard lines.
     

  14. #11 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    GrandPrix Junkie
    Join Date
    Oct 2009
    Location
    St. Louis
    Posts
    4,783
    Thanks (Received)
    18
    Likes (Received)
    76
    Dislikes (Received)
    0
    Wow, haven't seen that happen in many moons. Hope you weren't moving too fast when it broke loose. That's got "spin the a** end around" written all over it, lol
     

  15. #12 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,701
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    oh man, that would scare me pretty bad. the first real truck I bought had a brake issue once, but I made it home just fine. mine just leaked fluid each time I used the brakes. I'm glad to see that you posted about this after the fact. speaking of brakes, I just ordered front pads and rotors for my 2002 Silverado. hopefully they will keep me stopped when I'm holding the pedal down and getting ready to launch the truck.

    I like seeing updates about this car, keep em coming.
     

  16. #13 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Quote Originally Posted by BrandonHall10 View Post
    This is normal, right? This is fine.



    Probably not, but it does explain the loud bang and immediate wheel lock up last time I drove it. I put new rear shoes and hardware on today. Now every consumable part of the brake system is new. The only original parts are the pedal and hard lines.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
     

  17. #14 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    ^^^ LOL.

    So, not much going on with this lately. Put a couple miles on it here and there. I trust it a lot more since doing the rear brakes. Still not ready to take it on a road trip though. I've been mostly focused on getting the motor built for and the AC installed on my K10.

    The headlights that I ordered in November showed up today. I should be able to get them in this afternoon. They are supposed to be plug and play.



     

  18. #15 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    Headlights are in. I took a night drive to properly aim them. I'm happy to say that they are absolutely amazing! Easily the best headlights I have personally experienced. Granted, I have been limited to crappy sealed beams and barely better 9005/9006 halogen bulbs, but they are leaps and bounds above either of those. My phone camera is garbage so you'll have to take my word. Plenty of pictures on the Holley website. Anyhow, clean white light, great beam pattern and clean cutoff. I can't say how these compare to any of the eBay LED's, but I love the stock look. Well worth what I paid. I'll probably buy a set of the 4x6's (?) for my K10.

    And I put a new alternator on. Old one was still charging fine, but made an awful whining noise at certain RPM's. Like, loud as a tornado siren. LOL Pretty sure the bearings were shot.

     

  19. #16 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    We got tunes!







    It's going to take me a minute to figure out how to operate this thing, and it's probably/definitely more than I need. Especially right now with that little 4x10. However, it has all the bells and whistles if/when I decide to put a real system in this car. I'm not a super big stereo guy, but AM only was not going to cut it. Now I got AM, FM, USB, Bluetooth, and AUX.
     

  20. Likes Scottydoggs liked this post
  21. #17 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    GTP Level Member wowitsfast's Avatar
    Join Date
    Oct 2014
    Location
    portland oregon
    Posts
    955
    Thanks (Received)
    6
    Likes (Received)
    34
    Dislikes (Received)
    0
    Did you get that head unit from Classic Industries? I've been eyeballing it for awhile. My 66 needs a stock looking stereo for sure. I bought the dash speaker also.

    Does your back seat have a center speaker? Mine is supposed to but it doesn't for some reason

    Sent from my SM-G981V using Tapatalk
    Just a bunch of junk thrown together http://www.grandprixforums.com/membe...ht=wowitsfasts
     

  22. #18 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    Solving problems BrandonHall10's Avatar
    Join Date
    Mar 2014
    Location
    Tucson
    Posts
    3,182
    Thanks (Received)
    10
    Likes (Received)
    146
    Dislikes (Received)
    3
    Quote Originally Posted by wowitsfast View Post
    Did you get that head unit from Classic Industries?
    This one came from classiccarstereos.com. Only took like 5 day to receive after ordering. Not bad considering they have to put together a package specific to your vehicle.

    Does your back seat have a center speaker? Mine is supposed to but it doesn't for some reason
    Nope. All I have is the dinky 4x10 above the glove box. I'd like to add a pair of 6x9's when I replace the package tray. Someday.
     

  23. #19 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    GTP Level Member wowitsfast's Avatar
    Join Date
    Oct 2014
    Location
    portland oregon
    Posts
    955
    Thanks (Received)
    6
    Likes (Received)
    34
    Dislikes (Received)
    0
    My package tray is hacked up already more like 8x10 speaker holes! Maybe the seat speaker is a "curse of the more door" situation. Lol

    Sent from my SM-G981V using Tapatalk
    Last edited by wowitsfast; 02-18-2022 at 10:48 PM.
    Just a bunch of junk thrown together http://www.grandprixforums.com/membe...ht=wowitsfasts
     

  24. #20 Re: 1965 Chevelle Malibu - The new "family" hot rod. 
    SE Level Member
    Join Date
    Feb 2022
    Location
    SE Virginia
    Posts
    17
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Nice car! I saw it in the background of a couple of pics in your truck build thread and meant to ask about it. I guess I don't have to now, huh?
     

Page 1 of 4 123 ... LastLast

Similar Threads

  1. Still getting "Check Security System" and got "Battery Saver Mode"
    By J57ltr in forum General Tech Discussion
    Replies: 3
    Last Post: 08-08-2015, 01:36 AM
  2. How to properly reset "shift learn" or "adapt" in 4t65e-HD
    By AndrewGXP in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 4
    Last Post: 01-29-2015, 09:30 PM
  3. """"""""""3inch Cutout""""
    By PWNED in forum For Sale - Parts
    Replies: 4
    Last Post: 12-10-2013, 08:10 PM
  4. 2006 Grand Prix "Reduced Engine Power" and "Service Traction System" warnings
    By chadwick in forum General Grand Prix Discussion
    Replies: 31
    Last Post: 10-04-2013, 09:59 PM
  5. Time for a "new" Family Wagon
    By overtimeracing in forum General Tech Discussion
    Replies: 5
    Last Post: 06-30-2011, 08:21 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •