|
|
11-05-2008
I put viynal decals on the side of my Bronzemist GTP honestly though i think it looks pretty badass!! they decals are like the decals on the late 60's cudas on the sides of it. ill try n get pics this weekend. also is it hard to put a wheel bearing assembly on the front drivers side?? wat tools are needed and is it hard to do or??thanks
Last edited by GTPJOE90; 11-06-2008 at 12:49 PM.
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
11-05-2008
you'll need basic hand tools...air tools will make it quicker though but you will need to remove the caliper, caliper bracket, and rotor to do so. After that there are 3 bolts on the back side of the hub. Undo those, unplug the ABS sensor...and reverse order
11-05-2008
nice sounds like cake work! i gotta sweet deal 63 bucks shipped with the sensor and crap to my door. when autozone wants 90 or 139 bucks.... go figure ebay is the way haha
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
11-05-2008
oh that big nut thats like 2 inches in the middle has to be taken off right? or what is that?
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
11-05-2008
Yes it does. i believe i used a 33mm when i did mine but my shafts are aftermarket yours may be a bit diff size. Also you dont have to take the caliper and bracket off separately they are kelsey hayes style calipers and since your just getting it outta the way you dont need to get at the pads. Just compress the piston take the 2 bolts outta the back and remove the whole thing in one piece. You will prob want a hammer of some sort handy as well to help get the old hub assembly to come off. be sure not to loose the bracket behind it that holds the abs sensor wires outta the way of everything you will need to reuse it.
11-05-2008
Yup, you will have to remove that nut, Auto Zone has this socket available in their Loan-a-tool program. This is a pretty easy deal, good luck!!Originally Posted by GTPJOE90
11-05-2008
nice i heard they have supercharger pulley tools to with the 3 prong clamp thing? is it true?
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
11-06-2008
Check em out they are exact on both sides of the car and match perfectly no bubbles looks professional what do you guys think??
Last edited by GTPJOE90; 05-31-2009 at 07:47 PM.
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
11-06-2008
Look blurry to me. But what do I know.Check em out they are exact on both sides of the car and match perfectly no bubbles looks professional what do you guys think??
11-06-2008
looks decent
11-06-2008
Doesn't look too bad, but I'm not really a fan of decals.
x2 on getting them longer
11-06-2008
X3 on getting them longer.
11-06-2008
If that's what you like I can respect it but I'm still going to laugh
11-06-2008
x 2If that's what you like I can respect it but I'm still going to laugh
11-06-2008
I agree they would look better longer
11-06-2008
Yeah, they need to be acloser to the tail light. Looks kinda descent though. But, you need to figure out if you want those or the finder stripes. They don't look good together.
11-06-2008
cuda wasnt until 1970, and you are referring to the AAR cuda, which had a 340...All American Racer. im more of a fan of the 1970 hockey stick stripe and the 1971 billboard stripe, read up on your Mopars
11-06-2008
doesn't fit the car. try something else.
11-06-2008
I'm gonna be the 2nd X3
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
