the thumping noise etc... i believe i have a bad wheel bearing is it hard to replace them and how much do they usually cost? thanks guys for input
|
|
10-16-2008
the thumping noise etc... i believe i have a bad wheel bearing is it hard to replace them and how much do they usually cost? thanks guys for input
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
10-16-2008
they cost right around $100-$150 for the complete hub and bearing assembly. i dont belive thats your problem , never heard of a wheel bearing making a thumping noise , usually a howl or grinding sound. im in the norridge area if you want help doin a hub and bearing , 30-45 minutes including smoke breaks (and if it doesnt fix it i'll buy your old one from you , i need one)
10-16-2008
well its sorta a thump noise but not exactly.... lets say im driving down the road at lets say 30 it begins or more like 25 w.e anyways it starts the noise and gets louder as i go faster etc. but when im turning left the noise goes away.......... turning right it gets louder.... any ideas?
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
10-17-2008
its nothing to pull the hub and bearing assemblies out and check how free they spin and if there is any unusual noise. with air tools its 30 minutes a side. basically like doin a break job plus pulling the axle nut and three flange bolts. sometimes a bear to get out of the spindle but not usually. im gone this weekend , pickin up my sleds from storage, but let me know if you want some help the following weekend.
| « Previous Thread | Next Thread » |
