Thread: let's buy tools

Page 1 of 2 12 LastLast
Results 1 to 20 of 26
  1. #1 let's buy tools 
    GXP Level Member Poil336's Avatar
    Join Date
    Jun 2009
    Location
    Troy OH
    Posts
    2,919
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    So I'm going to school for auto tech, and hope to be in a garage this summer. I'm in a position where i can buy some tools now, so what are some of the forum's favorites? i have socket sets and combo wreches, but not much more than that. here's what i've kinda been tossing around:

    air compressor with impact gun, air ratchet, grinders and cut off wheel
    ratcheting wrenches, i love them so much
    i need an engine stand for my build, so i'll throw that in
    dial calipers and a micrometer
    my own pair of wire strippers
    circuit test light
    a new soldering iron
    maybe a really powerful dremel? that's not for cars as much, but i've needed them before
    SES/CEL scanner

    and i really really really want a copy of HP Tuners software

    any input?
    99 GT - top swapped, S2X cam. - sadly, sold
    96 Firebird Formula - T-tops and exhaust leak. 14.26 @ 97.8 - sold
    2008 Chevrolet Cobalt SS - stock, in all of it's turbocharged awesomeness
    Reply With Quote  
     

  2. #2 Re: let's buy tools 
    The mod from over yonder TheOtherNick's Avatar
    Join Date
    Sep 2008
    Location
    Charles City, IA
    Posts
    9,955
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Buy all the snap on stuff you can while you are in school. Other stuff you need
    power probe
    fuel line disconnect set
    dmm
    swivel sockets
    ball joint press
    any thing else you have money for
    01 gtp-big cam e85 dd 78dodge- guzzling fuel 05 cummins- rollin coal
    SMGPFC Two Nipple General
    Reply With Quote  
     

  3. #3 Re: let's buy tools 
    GXP Level Member Poil336's Avatar
    Join Date
    Jun 2009
    Location
    Troy OH
    Posts
    2,919
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    that snap on stuff is expensive as hell lol
    99 GT - top swapped, S2X cam. - sadly, sold
    96 Firebird Formula - T-tops and exhaust leak. 14.26 @ 97.8 - sold
    2008 Chevrolet Cobalt SS - stock, in all of it's turbocharged awesomeness
    Reply With Quote  
     

  4. #4 Re: let's buy tools 
    The mod from over yonder TheOtherNick's Avatar
    Join Date
    Sep 2008
    Location
    Charles City, IA
    Posts
    9,955
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Yeah because its ment to last and do its job everytime.
    01 gtp-big cam e85 dd 78dodge- guzzling fuel 05 cummins- rollin coal
    SMGPFC Two Nipple General
    Reply With Quote  
     

  5. #5 Re: let's buy tools 
    GXP Level Member Poil336's Avatar
    Join Date
    Jun 2009
    Location
    Troy OH
    Posts
    2,919
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    i don't doubt that at all
    99 GT - top swapped, S2X cam. - sadly, sold
    96 Firebird Formula - T-tops and exhaust leak. 14.26 @ 97.8 - sold
    2008 Chevrolet Cobalt SS - stock, in all of it's turbocharged awesomeness
    Reply With Quote  
     

  6. #6 Re: let's buy tools 
    The mod from over yonder TheOtherNick's Avatar
    Join Date
    Sep 2008
    Location
    Charles City, IA
    Posts
    9,955
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Yup 90% of my stuff is snapon. Guy shows up every week and warranties my stuff no ?s asked.
    01 gtp-big cam e85 dd 78dodge- guzzling fuel 05 cummins- rollin coal
    SMGPFC Two Nipple General
    Reply With Quote  
     

  7. #7 Re: let's buy tools 
    GXP Level Member Poil336's Avatar
    Join Date
    Jun 2009
    Location
    Troy OH
    Posts
    2,919
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    i feel like i could rack up a 5-figure account in the matter of 10 minutes lol. how often do you use air tools in a garage setting? i've been able to use hand tools for just about everything i've ever had to do
    99 GT - top swapped, S2X cam. - sadly, sold
    96 Firebird Formula - T-tops and exhaust leak. 14.26 @ 97.8 - sold
    2008 Chevrolet Cobalt SS - stock, in all of it's turbocharged awesomeness
    Reply With Quote  
     

  8. #8 Re: let's buy tools 
    The mod from over yonder TheOtherNick's Avatar
    Join Date
    Sep 2008
    Location
    Charles City, IA
    Posts
    9,955
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I use them all the time. Pretty much every job besides an oil change.
    01 gtp-big cam e85 dd 78dodge- guzzling fuel 05 cummins- rollin coal
    SMGPFC Two Nipple General
    Reply With Quote  
     

  9. #9 Re: let's buy tools 
    GrandPrix Junkie redlinepontiac's Avatar
    Join Date
    Sep 2010
    Location
    Waukesha, WI
    Posts
    4,791
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    breaker bars and a good ball pein would be good,

    my snap on guy doesnt know half the **** he sells.

    so i have mosly mac and matco both lifetime warrenty.

    but seriously buy as much as you can afford if you get a school discount
    RayRay
    92 Turbo miata
    71 bagged lemans wagon
    02 lexus is300
    Reply With Quote  
     

  10. #10 Re: let's buy tools 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    Let me say, I've never regretted the Snap-On stuff I've bought. If you are looking to start ... aim straight to the deep sockets (90% of what you do) and I'd personally recommed the ball pivot impacts. Don't think about the price, they are priceless in most situations. Screw drivers etc as well.

    Scan Ebay and Craigslist for deals on SnapOn. To have it warrantied, you don't have to be the original purchaser.

    As for ratcheting wrenches. Gearwrench XL's are fantastic and have most of the benefits of SnapOn. Don't mistake this for being as good as SnapOn, but they'll do just fine for what you'll be doing for years to come. Lifetime warranty as well.
    Amazon.com: Gear Wrench 85698 12 Piece XL Lock Flex Ratcheting Comb Wrench Set-Metric: Home Improvement

    Prybars.. want to buy one set? Gearwrench 82248 is FTMFW
    Amazon.com: GearWrench (KD 82301) 3 Piece Indexable Pry Bar Set: Home Improvement
    Amazon.com: GearWrench (KDT82248) 48" Extendable Pry Bar: Home Improvement

    On air tools. I'm a fan of the ingersol guns/air ratchets. Quiet, powerful and very durable. I picked up a used 3/8 Titanium IR gun off a forum for $75 shipped. Can't tell you how amazing that gun works. It'll rip out almost anything that my 1/2" gun will.

    Compressor - get something with a fast recovery, good storage and 150psi. 120 can work, but 150 does the better job hands down. I found a deal in the used section of Sears. It's common for someone to buy a tool like a compressor or chain saw, use it for a couple of days and return it. That's a nice price drop on a nearly new item. Browse this section at your local stores and nab the deals.

    Reversible snap ring pliers.
    Sears: Online department store featuring appliances, tools, fitness equipment and more

    Spring clamp tool, don't question it. Buy this biatch now..lol, probably 5 of my friends own one after using mine.
    Sears: Online department store featuring appliances, tools, fitness equipment and more

    Trim panel tools, I use the smaller ones for clips and connectors in the engine bay. Not necessarily this set, but this is an idea.
    Sears: Online department store featuring appliances, tools, fitness equipment and more
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  11. #11 Re: let's buy tools 
    They call me TriPod RamairGTP2's Avatar
    Join Date
    Aug 2009
    Location
    Wisconsin
    Posts
    1,009
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    Torque wrenches, Impact sockets *black ones* you should have a set of deep well and shallow well in 1/2 inch drive.. clamps,vise grips... Basically your list could never end because at one point you'll use each and every one of your tools.. Look into some of the specialty tools also as most modern cars require them someplace to remove parts. So far you are pretty good with what you'll need and the things others have mentioned too.
    Quote Originally Posted by bluegtp91 View Post
    Snorlax strikes again.
    Reply With Quote  
     

  12. #12 Re: let's buy tools 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    air tools are key. saves time.
    Reply With Quote  
     

  13. #13 Re: let's buy tools 
    GT Level Member RegalGS98s's Avatar
    Join Date
    Oct 2010
    Location
    NJ
    Posts
    369
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Was about to say, ask your instructor if you get a school discount. Friend of mine got 40% off with their school discount on Snap-on tools. After school though I recommend Husky from Home Depot and Harbor Freight tools.

    I've had my Husky tools for a long time. I haven't broke any of my sockets. I did break the 1/4" and 3/8" extensions and wore out the 1/4" and 3/8" ratchets after 15 years and replaced them easily. Friend has 1/2" drive Husky impact gun that ran circles around the snap on and Mac tools guns in his UPS shop working on their tractor trailors. Broke bolts loose their's couldn't without having to step up to the 3/4" or 1" impacts. They had a Hurricane compressor for air supply.

    I recommend staying away from craftsman. You'll be going to the store constantly turning in sockets for the lifetime warranty.

    I have alot of Harbor Freight tools. Their tools are really good for the money, especially with the coupons and lifetime warranty on hand tools. Seems like I have at least 1 of everything they sell since I'm there constantly. They also have alot of specialty tools (compression tester, fuel injector noid tester, spring compressor, etc.). There are some items to stay away from though. Just ask, I can probably give you a review on it.

    Also check out some Ingersoll-Rand tools. They make great impact guns, though I use the Harbor Freight Earthquake impact myself (basically an Ingersoll-Rand copy). It's on the heavy side, but lots of power.

    If you'll be working on any Honda's, you'll need an impact screwdriver and some heat for their brake rotor screws.
    Impact Screwdriver Set with Case

    Some other tools:
    1/2" Impact Wrench and Quality Impact Wrenches- Harbor Freight Tools
    3/8" Professional Air Ratchet Wrench Kept getting stuck when I first got it, but after a couple days with constant lubing, it wore in and it is strong.
    11 Piece Snap Ring Pliers Set
    Oxygen Sensor and Diesel Injection Socket Set
    11 Piece Noid Light and IAC Tester Set
    1/2" Extendable Ratchet I love this thing, works great in the wheel well area when trying to find a long enough wrench and you can't get enough leverage without bumping into things.
    3/8" x 1/4" Dual Drive Extendable Ratchet
    7 Piece 1/2" Drive Metric Impact Swivel Socket Set
    7 Piece 3/8" Drive Metric Impact Swivel Socket Set
    http://www.harborfreight.com/7-piece...set-67913.html
    7 Piece 3/8" Drive SAE Impact Swivel Socket Set
    8 Piece 1/2" Drive Internal Impact Star Socket Set I've broke other sets, this set holds up.
    There's a set of security star sockets with the hole in the center (couldn't find a link to the set at the moment)
    6 Piece 1/4" Drive Star Bit Set
    Haven't used this 1/4" drive set yet, but is now on my list to get.
    7 Piece 1/4" and 3/8" Drive External Impact Star Socket Set
    4 Piece 1/2" Drive Impact Extension Set Haven't broke any yet
    2 Piece Universal Impact Joint Set
    7 Piece Impact Socket Adapter Set
    8 PIece High Visibility 3/8" Drive Deep Wall Metric Impact Socket Set No 15mm in the set, but use constantly.
    3 Piece 3/8" Drive Impact Wobble Socket Extension Set
    9 Piece 1/4", 3/8" and 1/2" Drive Wobble Socket Extensions
    So many more, but ran out of time.
    Last edited by RegalGS98s; 04-20-2011 at 09:38 AM.
    SMGPFC #0330 - 3.25, Intercooled, Custom Tune, 1.84rr, LS6 Springs, roller timing chain, SLP Headers, Borla Exhaust, built Trans, B&M Trans Cooler, home cut poly uppers, gapless rings, N* TB, Ported heads.
    Soontocome: CAM?, Custom modified M112, home poured Poly Engine and Trans mounts
    Reply With Quote  
     

  14. #14 Re: let's buy tools 
    GTX Level Member
    Join Date
    Jan 2010
    Location
    Delaware, OH
    Posts
    635
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Without question
    Ingersol Rand Titanium Impact wrench - best bang for the buck. Half the guys at the dealership I worked at ditched their Snap-on/mac impacts and picked up Ingersol's after I got mine. 1,000ftlbs will break the toughest bolts loose. (only one I ever struggled with was a honda crank bolt LOL)

    As far as wrenches save some money and go craftsman. Never had a problem with them and they're half the price of snap-on/ mac/ matco. Even cut one to make it fit a tight spot and they still swapped it out for me for a new one.
    No More GTP for me.

    2014 Chevy Cruze ECO Manual. 40+MPG
    Reply With Quote  
     

  15. #15 Re: let's buy tools 
    GrandPrix Junkie redlinepontiac's Avatar
    Join Date
    Sep 2010
    Location
    Waukesha, WI
    Posts
    4,791
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    my new favorite tool is the IR 3/8 impact ratchet. it just kicks ass and you can take lug nuts off with it
    RayRay
    92 Turbo miata
    71 bagged lemans wagon
    02 lexus is300
    Reply With Quote  
     

  16. #16 Re: let's buy tools 
    GXP Level Member Poil336's Avatar
    Join Date
    Jun 2009
    Location
    Troy OH
    Posts
    2,919
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    thank you guys for so many links, i'm sure that took forever
    99 GT - top swapped, S2X cam. - sadly, sold
    96 Firebird Formula - T-tops and exhaust leak. 14.26 @ 97.8 - sold
    2008 Chevrolet Cobalt SS - stock, in all of it's turbocharged awesomeness
    Reply With Quote  
     

  17. #17 Re: let's buy tools 
    GrandPrix Junkie
    Join Date
    Oct 2009
    Location
    St. Louis
    Posts
    4,790
    Thanks (Received)
    18
    Likes (Received)
    76
    Dislikes (Received)
    0
    For the soldering iron I would suggest a good adjustable temp Weller. Also, if you can find some older S-K tools those seem to hold up great as well.

    A/C disconnet tools, A/C evacuation pump, line flaring tool(s), Metric AND standard tap & die set, bolt-out removers, fuel pressure gauge, A/C gauges, a decent code reader (Snap-on makes a good one for a few hundred), engine hoist and cross-support for hanging an engine in between the fenders, a good quality floor jack (an older Walker or Lincoln jack will last a lifetime and are rebuildable, and also made in the USA) and punches in various forms also come to mind.
    Reply With Quote  
     

  18. #18 Re: let's buy tools 
    GT Level Member sportred04's Avatar
    Join Date
    Feb 2010
    Location
    indianapolis
    Posts
    476
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by RegalGS98s View Post

    I recommend staying away from craftsman. You'll be going to the store constantly turning in sockets for the lifetime warranty.

    WHAT?

    almost all my sockets are craftsman. have a few snapons and matcos and havent broken any of them using a IR titanium 1/2 drive impact. i work on semis and use my impact alot.


    OP....dont be afriad of craftsman, just dont get there innovative crap. thats all Chinese. get there sockets, ratchets, that type of stuff and youll be set. snapon, matco, mac(if you can find them), cornwell(good quality and cheaper of the dealers), ive even seen a few SK trucks.
    Quote Originally Posted by Warbeaver View Post
    I loved it when Bill Cosby said, " if you don't want white folks to look at you different, pull your damn pants up and learn to dress yourself"
    Reply With Quote  
     

  19. #19 Re: let's buy tools 
    GT Level Member sportred04's Avatar
    Join Date
    Feb 2010
    Location
    indianapolis
    Posts
    476
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    also if you have a good basic set you will be good to get started. You will definitely find out what all you need when you start wrenching in a shop.
    Quote Originally Posted by Warbeaver View Post
    I loved it when Bill Cosby said, " if you don't want white folks to look at you different, pull your damn pants up and learn to dress yourself"
    Reply With Quote  
     

  20. #20 Re: let's buy tools 
    GT Level Member RegalGS98s's Avatar
    Join Date
    Oct 2010
    Location
    NJ
    Posts
    369
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by sportred04 View Post
    WHAT?

    almost all my sockets are craftsman. have a few snapons and matcos and havent broken any of them using a IR titanium 1/2 drive impact. i work on semis and use my impact alot.


    OP....dont be afriad of craftsman, just dont get there innovative crap. thats all Chinese. get there sockets, ratchets, that type of stuff and youll be set. snapon, matco, mac(if you can find them), cornwell(good quality and cheaper of the dealers), ive even seen a few SK trucks.
    I have a set of Crapsman. Split one of the sockets 4 times in a row going back and forth to Sears for exchanges. Got tired of it and stopped at Kmart (before they joined with Sears) of all places and got some Chinese Junk to break the bolt loose. As far as other tools from Sears. I got a 4 1/2" grinder from them. When I finally went to use it, it quit after using it for a week. I didn't find the receipt until 7 days after the 1 year warranty expired. They wouldn't budge on it at all, just said buy another one. Went to Harbor Freight. Got their Magnesium Grinder for half the price and still working to this day. I've had other Harbor Freight tools break and turn them in 2 months past warranty and they still honor it. On another issue, found out thru a large class action lawsuit Crapsman lied about the power rating on my lawnmower. They wanted to know all sorts of info so I didn't enroll cause all they would do is extend the warranty. Friends and I havn't had good luck with their tools.
    SMGPFC #0330 - 3.25, Intercooled, Custom Tune, 1.84rr, LS6 Springs, roller timing chain, SLP Headers, Borla Exhaust, built Trans, B&M Trans Cooler, home cut poly uppers, gapless rings, N* TB, Ported heads.
    Soontocome: CAM?, Custom modified M112, home poured Poly Engine and Trans mounts
    Reply With Quote  
     

Page 1 of 2 12 LastLast

Similar Threads

  1. Scan tools
    By Deviq in forum General Tech Discussion
    Replies: 5
    Last Post: 09-30-2010, 08:40 PM
  2. wheel hub tools...
    By Jakegday in forum General Tech Discussion
    Replies: 12
    Last Post: 01-14-2009, 01:16 AM
  3. Scan tools
    By mattio in forum General Tech Discussion
    Replies: 3
    Last Post: 11-02-2008, 10:07 PM
  4. Daddy got new tools
    By SyntheticShield in forum Off Topic Discussion
    Replies: 23
    Last Post: 06-16-2008, 07:29 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •