Thread: MA inspection with HPTuners

Results 1 to 6 of 6
  1. #1 MA inspection with HPTuners 
    Donating Users
    Join Date
    Jan 2010
    Location
    South Deerfield, MA
    Posts
    552
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I was wondering if anybody has a car tuned by HPTuners that has gone through MA state inspection recently. A friend of mine just brought his mustang through inspection and failed. He had a programmer that was causing the failure. He had to swap back to the stock tune to get it to pass. I have until December before I have to get my inspection, but was wondering if I will have a problem. I will definitely fail on my stock tune, so that isn't an option for me. Anybody?

    2002 GTP: GMPP Sway Bars, BMR trailing arms, KYB AGX/Vogtlands, 12" brake upgrade
    Modified SSAC headers, K&N Intake, 3.4 MPS, S1X, Gen V, 104's, HPTuned.
    Reply With Quote  
     

  2. #2 Re: MA inspection with HPTuners 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    What does it look for? The OBD II tests to be "ready"? That should be passable with working emissions systems and no codes disabled.

    Connect the VCM scanner to your car and open DTCs. The first tab should provide the necessary information.

    And how exactly did your friend put a stock tune on? via dealership or put a stock calibration on with his tuning tool.

    If it was the former, that might make sense. Otherwise I'm not so sure.
    Reply With Quote  
     

  3. #3 Re: MA inspection with HPTuners 
    Donating Users
    Join Date
    Jan 2010
    Location
    South Deerfield, MA
    Posts
    552
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    No idea what it looks for. This is the Democratic Peoples Republic of Massachusetts (DPRM for short), so there are no limitations as to how far they will try to go. He did say that they told him at the first failure that two sensors were not showing up. I wasn't there, so I can't provide any further info than that. He has something like a Hypertech programmer (forgot which brand), so he reflashed it back to stock.

    My car with the stock tune trips the misfire code and catalyst efficiency code due to the cam and high flow cat. I have them both set to not report and have not had a problem in the past. He has been through emissions before without a problem also, so it must be something new they look for this year.

    2002 GTP: GMPP Sway Bars, BMR trailing arms, KYB AGX/Vogtlands, 12" brake upgrade
    Modified SSAC headers, K&N Intake, 3.4 MPS, S1X, Gen V, 104's, HPTuned.
    Reply With Quote  
     

  4. #4 Re: MA inspection with HPTuners 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    Massachusetts Vehicle Check

    Basically it needs to be able to communicate with their scan tool and all but one of your OBD tests must read ready.

    Hookup your HPT and check it out to see whats going on. Then go from there.

    Does not mention anything about looking for sensor data, however its possible they do. Just make sure everything on the standard OBDII list works. Things like both O2 sensors, EGR position etc.
    Reply With Quote  
     

  5. #5 Re: MA inspection with HPTuners 
    Donating Users
    Join Date
    Jan 2010
    Location
    South Deerfield, MA
    Posts
    552
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Thank you Matt! I poked around the RMV website, but did not find that page. My understanding is that our cars show ready if the test is set to not report. I'll hook up to it and see if everything shows as ready.

    2002 GTP: GMPP Sway Bars, BMR trailing arms, KYB AGX/Vogtlands, 12" brake upgrade
    Modified SSAC headers, K&N Intake, 3.4 MPS, S1X, Gen V, 104's, HPTuned.
    Reply With Quote  
     

  6. #6 Re: MA inspection with HPTuners 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    they do show ready when the code is set to not report. I have gone through CT that same way in the past. I believe some of the newer vehicles don't become ready when the code is set to not report. IIRC Max had that trouble with his G8
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

Similar Threads

  1. Passing Inspection
    By apierce1289 in forum The Rant Forum
    Replies: 16
    Last Post: 08-11-2012, 05:21 AM
  2. Eaton M 90 Inspection??
    By jsnyder49090 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 13
    Last Post: 07-11-2012, 05:57 PM
  3. Passing inspection!
    By apierce1289 in forum PCM Tuning
    Replies: 14
    Last Post: 04-06-2012, 01:44 PM
  4. inspection problem
    By kingd44 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 9
    Last Post: 01-31-2011, 08:17 PM
  5. Passing Inspection
    By blueguy in forum General Tech Discussion
    Replies: 5
    Last Post: 02-22-2009, 11:52 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •