|
|
12-30-2010
Is there anyone local or in the wichita area that could scan my PCM and delete the 1133 code? Ive gone through a couple new sensors, double checked the exhaust for leaks, checked the wiring for damage, everything is good but im still throwing this code.
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
01-01-2011
disconnect your battery for like 30 mins.
Originally Posted by Bio248
01-01-2011
nah the battary will only clear it i think he wants it permanetly deleted so it cant throw the code ever again
01-01-2011
read it wrong, my bad.. Taz is right..
Originally Posted by Bio248
01-02-2011
I did unplug the battery. And strangely the light has been off for almost 4 days. (ive unplugged the battery to fix this b4, it nvr workd for more than a day) im just waiting for the light to come back on so i can switch O2 sensors and see if that truly fixes the prob. If not i really need the code deleted. & the funny thing is, now my car idles at 1300rpm (i havent done anything to the car recently) since the light went off. could the pcm be doing that? Or is my maf sensor bad, or could the below freezing temps here mess with the maf? anyone willing to scan my car for meto find out the issue?
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
01-02-2011
may even be the throttle position sensor, if it idles at 1300
01-02-2011
Both sensors are relatively new.
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
01-02-2011
vac leaks?
Originally Posted by SuperSport
01-02-2011
1133 code is slow 02 switch rate. I had the same issue on mine. I wasted about 30 hours trying to fix it. I never was able to come to a conclusion as to why I had the issue. I just deleted the code a well. No issues 3 years later
http://www.streetfire.net/video/2001...ynp_208097.htm
01-02-2011
Anyone have a TPS they don't need that I can have?
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
01-02-2011
apparently you need a delco O2 and it'll go away.
01-02-2011
Tried delco, Tried the race bosch, tried the normal bosch. Need any 02's? lol
http://www.streetfire.net/video/2001...ynp_208097.htm
01-02-2011
I'm quite good with my NTK thanks.
01-02-2011
ive had delco and bosch O2 sensors. Ive got a denso i can use when or if the light does come back on.
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
01-02-2011
As for my possibly bad TPS. Would cleaning it do any good?
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
01-02-2011
I wouldnt think so.
Damage has already been done.
there is a bulletin that says they can vary their output so quickly that a tech 2 scanner wouldnt be able to pick it up yet it could still be bad.
01-02-2011
If you're ever 37 miles east of KC, I can delete it.
01-02-2011
or if your in olathe i could also
01-04-2011
There is a local to you...Jeremy.
Pity410 on KCPMC.net
I doubt he comes here, but you can contact him through Farnsworth.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
