Trannyman95
Transmission Expert

I Drive a 02 gtp and am looking to install a 98gs transmission into the car cause mine is bad, to my understanding the cooling line fittings are different. what is the best way to handle that issue and are there any other issues i have to worry about? thank you for any help u can give

The quickest way to contact us is through email. Dave@Tripleedgeperformance.com

Have a 1998 4t65e just rebuild new steel; seals; cluthes; replaced 4th hub and sun gear on start-up have long shift time from 1st to 2nd 3rd 4th fine drove around for while now have whine any ideas i did replace all soleniods tranny had over 200 thousands on it at time of rebuild where do I go from here??? I am leaning to 2nd clutch maybe any ideas thanks Rob

i have a 01 ikpala 3.8 4t65e. the problem i had for several years is the torque converter kicks in and out under slight power. had it to a tranny shop 5 times over several years. after 2 torque converters and several valve bodies i stil have the same issue. what can cause this? it seems to work fine for a while after the repair but the issue always returns. any ideas??

trans worked great yesterday after selenoid was replaced. today it is acting up doing something different. the converter pulses in and out of lock up under accel. what do you think? will having the taps reset do anything??

thanks already put a new selenoid,put about 100 miles on and seems to work now. keeping my fingers crossed. what goes wrong with the tcc selenoid?

what are your thoughts on using a Helicoil to repair stripped threads on a 00 4t65e-hd feed line?

also a shift kit that chirps second harmful to the 4t65ehd trans?

single chain conv and 4th clutch bought and on it's way. what gaskets do i need

placed an order request today on triple edge performance.com