BillBoost37
Turbo is the way to go.

What do you think of a Nic cam? I dont plan to intercool and I like the sound.

You can jack and support it, pull the bracket then do it.

Boost, i really need some advice here. i got 2 GP's with 3.8's that need oil pan gaskets. from what alldata's telling, i basically gotta pull my motor to change the gaskets. i've pulled my motor before and rebuilt it so i can pull it but i just don't have the time. there's gotta be an easier way. any help will be appreciated. thank you.

oh billy...
I replaced that VSS sensor...shifting has improved greatly doesn't do the hesistant between 2-3 with little throttle like before, it does it but not as bad (it picks a gear in other words). WOT shifts = still delayed. So I'm just gonna ride it as is since I don't drive the car much, nor do I ever plan to push WOT all the time, when the tranny goes, we will find out what the problem was.

I can do a dhp 1.0 or 1.5 which should be close.

I was having a PCM malfunction. That's gone but now it's giving me a timing error and I'm putting and losing a ton of gas. Can you do One of those tunes like they do on thrashed or 3800preformance

I was joking, they are Intrigue98's

Are the projectors for pre 03 models?

Hey I was writing you to let u know I put that PCM in last week and this week after driving ove 100 miles it's still shooting out codes and making my car putt real bad and giving me ba gas milage!

hi bill hey could you point me in the right way I have an 04 buick regal and I changed out all the interior lights for LEDs but now a few weeks later all lights in the car stay on. Any ideas?