HVACgtp
GTX Level Member

Thank you sir!

Aeroforce gauge

Or a solenoid clicking

Nah it's not a bad coupler, amd I know it's not valve tap. It almost sounds like plastic

Hey I tried to send a response about the Coupler, your inbox is full.

but I was going to say the coupler tends to only rattle at idle, once revved up it will usually stop. If you go to youtube and search for "3800 bad coupler" you can see several videos to see if that is what yours sounds like.

The demon eyes were done with LEDs, you would have to mount them on the solenoid in front, just behind the lens. My fogs were 6th Gen Maxima (04-08) Projector fogs. Yes with Bi-Xenons you don't have a need for the High Beam halogen reflector. Your DRL wire is also the Turn signal wire, just and FYI. SO if its going to be a DRL it will be your turn signal as well...That is how I have mine setup.

Panda Superleggera started back in August because I was on the trail to buy a manual (but something smelled funny and I backed out from the deal). Anyways, the tranny would have shed about 120lbs off the cars weight, I was also thinking about doing two-piece rotors and super light weight wheels, thus shedding a good amount of weight. After all, Lambo's with that name only shed about 100lbs anyways. But I'm growing bored with the car and just want it finished so those things got cut.