JoshsGTP
I GIVES MONIEZ

MSR 045

I don't mind, I'm going to something else this spring, these will probably get winter tires on them next season

Hello to myself

I used a heat gun to heat the side of the lights. I did it in sections. Once the area was hot enough I used a screw driver to start prying the lens away from the housing. You could also pop them in the ovenand do the same thing. You can use this link fro reference. Just take your time as the black plastic from the housing gets a little weak when hot. If you can't take them apart right away as they are cooling off, you can use place them back in or use a heat gun or hair dryer to keep them hot.
http://www.cardomain.com/ride/224386...urne-fl-us?p=2

hey what u think is better on the intake make it with a pipe 45 angle or the open cone

youre gonna have to ask an admin to do that. i cant change user profiles.