|
Ace, find some little old ladies to be nice to ... or provide services for. For goodie monies. We won't tell.
Or just make me an offer
You may not want to go that low guy
Sent from my iPhone using Tapatalk
Yea but for a DD you may not want that.. Vogtlands are a better choice.
Sent from my iPhone using Tapatalk
Exactly.. A nice even drop that won't suck to drive.. You might want to look into it a bit more most of us will scream 4x4 status but the reality is to much of a drop is a pain in the dick
Sent from my iPhone using Tapatalk
You must be smokin the Blue meth cuz SSCs drop even...same front same back drop. At least on my 04 they did.... tape measured before and after.
They leave the front looking that way because of the fender cut/profile......you would have to do coilovers then so you can pick....pickyfker
So I found some B&G at Andys autosport advertized for 255 with a front and back drop of 1.2.
SSCs from Canuck motorsports are 167, delivered to your door for 197.
For the 04+ they are listed as a 1.7 drop. Mine were closer to 2".
If you want to experiment get some GXP springs, in their application guide it lists them as 2.5 front and 2 rear.
That would solve the front higher thing you are concerned about. Those of course would for all intentional purposes be used with Bilsteins.
In my sig is SSCs with 18x8, 40 offset and 245/45/18
https://www.octanemotorsports.com/97...FUwS7AodV0QAcA
So I found these. And does that mean the gxp ssc application would need to be used with billsteins?
No you wouldn't have to use them with Bilsteins, they would just lower more. But then the ride would be.... well who the hells knows?
So you found some B&Gs. Are you afraid of the SSC drop? Those look to be 1.5 even though they could drop more.
What are you looking for.....no drop. It takes about a 2 inch drop to even notice the difference in looks.
B&G are more expensive and less drop
You won't buy my rockers butthole
« Previous Thread | Next Thread » |
Tags for this Thread |