Thread: Car issues couple of fault codes.

Results 1 to 5 of 5
  1. #1 Car issues couple of fault codes. 
    wakkamis
    wakkamis is offline
    SE Level Member wakkamis's Avatar
    Join Date
    Jun 2013
    Location
    elgin
    Posts
    75
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Default 08-31-2015
    I was following along on another thread where a vehicle was overheating, did the flush and fill and bleed out the air, and I'm still having issues. The engine started doing what i can only describe as a hiccup. Happens a few times a trip while accelerating or idling or stopped at a light.

    I picked up an obd 2 bluetooth reader and the torque app for android and saved these logs out:

    Any info would be awesome, Thanks!

    (I do not know why its throwing color tags around everything. :/)

    Fault log report generated by Torque for Android
    =================================================

    Vehicle VIN:
    [COLOR=rgba(0, 0, 0, 0.8)]Vehicle Manufacturer:
    [COLOR=rgba(0, 0, 0, 0.8)]Vehicle Calibration ID:

    [COLOR=rgba(0, 0, 0, 0.8)]Current Fault Log
    [COLOR=rgba(0, 0, 0, 0.8)]------------------
    [COLOR=rgba(0, 0, 0, 0.8)]P0171: System too Lean (Bank 1)
    [COLOR=rgba(0, 0, 0, 0.8)]P0481: Cooling Fan 2 Control Circuit

    [COLOR=rgba(0, 0, 0, 0.8)]Pending Fault Log
    [COLOR=rgba(0, 0, 0, 0.8)]------------------
    [COLOR=rgba(0, 0, 0, 0.8)]ECU reports no pending faults

    [COLOR=rgba(0, 0, 0, 0.8)]Historic Fault Log
    [COLOR=rgba(0, 0, 0, 0.8)]------------------
    [COLOR=rgba(0, 0, 0, 0.8)]ECU reports no historic faults
    [COLOR=rgba(0, 0, 0, 0.8)]Other discovered fault codes
    [COLOR=rgba(0, 0, 0, 0.8)](possibly pending, current or manufacturer specific)
    [COLOR=rgba(0, 0, 0, 0.8)]----------------------------------------------------
    [COLOR=rgba(0, 0, 0, 0.8)]ECU reports no other fault codes logged

    [COLOR=rgba(0, 0, 0, 0.8)]End of report.

    and

    [/COLOR][COLOR=rgba(0, 0, 0, 0.8)]Mode $06 report generated by Torque for Android
    [COLOR=rgba(0, 0, 0, 0.8)]================================================

    [COLOR=rgba(0, 0, 0, 0.8)]Vehicle VIN:
    [COLOR=rgba(0, 0, 0, 0.8)]Vehicle Manufacturer:
    [COLOR=rgba(0, 0, 0, 0.8)]Vehicle Calibration ID:

    [COLOR=rgba(0, 0, 0, 0.8)]Unit and scaling information are not supplied with the data from the ECU for this type of vehicle. Consulting the manufacturers service book for this information is recommended.

    [COLOR=rgba(0, 0, 0, 0.8)]Test report:
    [COLOR=rgba(0, 0, 0, 0.8)]------------------
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$01
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 65,535
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 14,400
    [COLOR=rgba(0, 0, 0, 0.8)]PASS
    [COLOR=rgba(0, 0, 0, 0.8)]----
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$02
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 65,535
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 15,999[
    [COLOR=rgba(0, 0, 0, 0.8)]PASS
    [COLOR=rgba(0, 0, 0, 0.8)]----
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$03
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 65,535
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 9,583
    [COLOR=rgba(0, 0, 0, 0.8)]PASS
    [COLOR=rgba(0, 0, 0, 0.8)]----
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$04
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 65,535
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 17,638
    [COLOR=rgba(0, 0, 0, 0.8)]PASS
    [COLOR=rgba(0, 0, 0, 0.8)]----
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$05
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 10,880
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 1,792
    [COLOR=rgba(0, 0, 0, 0.8)]PASS
    [COLOR=rgba(0, 0, 0, 0.8)]----
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$06
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 10,240
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 896
    [COLOR=rgba(0, 0, 0, 0.8)]PASS
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$07
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)
    [COLOR=rgba(0, 0, 0, 0.8)]Min: 42
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 230
    [COLOR=rgba(0, 0, 0, 0.8)]PASS
    [COLOR=rgba(0, 0, 0, 0.8)]----
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$08
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)
    [COLOR=rgba(0, 0, 0, 0.8)]Min: 42
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 231
    [COLOR=rgba(0, 0, 0, 0.8)]PASS
    [COLOR=rgba(0, 0, 0, 0.8)]----
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$0a
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)
    [COLOR=rgba(0, 0, 0, 0.8)]Test incomplete or dependant test failed
    [COLOR=rgba(0, 0, 0, 0.8)]--[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$0b[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Min: 21,944[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 15,694[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]FAIL[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$0c[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 9,305[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 13,888[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]FAIL[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$0d[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 32,903 Min: 32,738[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 32,782[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$07 CID:$4f[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Minimum sensor Voltage for test cycle(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 33,564[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 31,023[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$0a CID:$01[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Sensor period(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 150[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 16[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$0a CID:$04[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Sensor period(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Min: 50[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 50[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$0a CID:$05[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Sensor period(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 289[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 53[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$0a CID:$06[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Sensor period(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 123[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 31[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$0a CID:$07[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Sensor period(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Min: 600[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 600[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$0a CID:$42[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Sensor period(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Min: 6,000[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 6,039[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$0a CID:$48[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Sensor period(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 32,868[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 32,770[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$0c CID:$60[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Misfire counts for last/current driving cycles(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 32,768[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 32,768[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$0e CID:$12[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - [/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 0[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 418[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]FAIL[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$01[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 65,535[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 14,400[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$02[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 65,535[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 15,999[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$03[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 65,535[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 9,583[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$04[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 65,535[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 17,638[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$05[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 10,880[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 1,792[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$06[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 10,240[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 896[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$07[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Min: 42[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 230[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$08[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Min: 42[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 231[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$0a[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test incomplete or dependant test failed[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]--[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$0b[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Min: 21,944[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 15,694[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]FAIL[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$0c[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 9,305[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 13,888[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]FAIL[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$05 CID:$0d[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Rich to Lean sensor switch time(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 32,903 Min: 32,738[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 32,782[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]TID:$07 CID:$4f[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)] - Minimum sensor Voltage for test cycle(calculated)[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Max: 33,564[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]Test result value: 31,023[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]PASS[/COLOR]
    [COLOR=rgba(0, 0, 0, 0.8)]----[/COLOR]


    [COLOR=rgba(0, 0, 0, 0.8)]End of report.[/COLOR]
    Last edited by wakkamis; 08-31-2015 at 10:23 AM.
    Reply With Quote  
     
  2. #2 Re: Car issues couple of fault codes. 
    Scottydoggs
    Scottydoggs is offline
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Default 08-31-2015
    you need to redo them pic's if thats what they were. no idea what any of that means.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     
  3. #3 Re: Car issues couple of fault codes. 
    BillBoost37
    BillBoost37 is offline
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    Default 08-31-2015
    I see a 171 in there
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     
  4. #4 Re: Car issues couple of fault codes. 
    wakkamis
    wakkamis is offline
    SE Level Member wakkamis's Avatar
    Join Date
    Jun 2013
    Location
    elgin
    Posts
    75
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Default 08-31-2015
    not supposed to be pics.. just a log from torque...

    mostly intrested in:

    P0171: System too Lean (Bank 1)
    P0481: Cooling Fan 2 Control Circuit
    Reply With Quote  
     
  5. #5 Re: Car issues couple of fault codes. 
    BillBoost37
    BillBoost37 is offline
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    Default 08-31-2015
    My fix for hiccups is a crank sensor swap. First time I came across the sensor was my car doing a hiccup. Here's the way to ensure if it's a crank sensor... watch your run time counter. If it reset during your trip, it's a crank sensor.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     
« Previous Thread | Next Thread »

Similar Threads

  1. 2008Grand prix fault codes p1125-p2120-p2138
    By daviddawg in forum Introductions/Noob Questions
    Replies: 5
    Last Post: 04-04-2014, 02:10 PM
  2. '06 2 Throttle Fault Codes
    By Subwarrior632 in forum General Tech Discussion
    Replies: 2
    Last Post: 10-22-2012, 12:01 PM
  3. 3 Transmission fault codes
    By JB381 in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 4
    Last Post: 05-29-2010, 09:38 PM
  4. Pls help with fault codes
    By stoksuks in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 0
    Last Post: 03-01-2010, 06:15 PM
  5. couple of questions, couple of issues
    By zero in forum General Tech Discussion
    Replies: 2
    Last Post: 12-30-2009, 04:48 PM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules