Hey tryn to do ball joints on a 97. What's the best way to get the top nut off holdin the ball joint. The dam cv joint gets in the way
|
|
10-01-2013
Hey tryn to do ball joints on a 97. What's the best way to get the top nut off holdin the ball joint. The dam cv joint gets in the way
10-01-2013
With this.
10-01-2013
once you pop the ball joint free, just buy new lower control arms and install them, new bushings and a new ball joint for about 40 bucks a side cant be beat.
10-01-2013
Use a 18mm open end wrench and turn it off as far as you can then pop the ball joint and take it the rest of the way off
10-01-2013
K got that. How about putting it back on? Can't get wrench in there. Sorry first time doing any suspension chasis work. Wana make sure it's on there tight
10-01-2013
you can get a wrench in there. try turning the wheels one way or the other, it may make the bolt easier to get for you.
10-01-2013
I fought with mine a little, I just ended up using an open end wrench and penetrating oil to get it off.
10-02-2013
Kk Ty. Do I need to put on that rubber boot
10-02-2013
There should be 1 boot on the ball joint, it needs to stay there.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
