Thread: New member with question about unable to get shifter into PARK

Results 1 to 8 of 8
  1. #1 New member with question about unable to get shifter into PARK 
    SE Level Member
    Join Date
    Sep 2013
    Location
    Minnesota
    Posts
    4
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hi all, working on problem on 97 Pontiac Grand Prix that my daughter used to drive. I cannot get the console shifter to move into the PARK position and so the key cannot be turned fully off and removed. Pretty sure this is also killing the battery since the ignition is still partly on.
    Other reading talks about the manual shift release via a hole on top of console and maybe a brake pedal switch or fuse being involved. I opened up the console to expose the shifter mechanism. Tried that switch actuator several times but still won't work.....by the way, the battery is dead while trying this. That switch has a 5 wire connector on it. Wish I knew if there is a mechanical cause via that cable or rod that goes from the shifter through the forward area and out and under the body.......or a dependent electrical function that is not occurring due to a faulty switch, etc.

    it is possible to shift into any of the other positions as well as drive the car...just has to be left in neutral and set parking brake and key cannot be removed when you stop the car.

    Any help appreciated!
    Reply With Quote  
     

  2. #2 Re: New member with question about unable to get shifter into PARK 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,921
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    the shiftier seems to have taken a crap, a junk yard replacement maybe the best route. unless you can figure out mechanically whats hold it up for going into park. could have some thing to do with the release button on the top of the handle.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  3. #3 Re: New member with question about unable to get shifter into PARK 
    Master-Breaker CapnBreakAlot's Avatar
    Join Date
    Mar 2013
    Location
    Spring, TX
    Posts
    2,725
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I had this issue once. There should be a manual release under the steering wheel that should allow you to get it into park. I can't remember exactly how to get it to work but its a hole around the size of a pencil that you can stick a pencil or screwdrivier into and it should at least allow you to get your key out.
    2001 Buick Regal GSE - S1X - Blue 90# springs - TOG's - Devils Own Water/Methanol kit - 80s - E85 - ZZP 3" dual catback - 2.7 - 23* - N* TB - LQ4 MAF - Gen V - TEP Stage 3 Trans - 3.29s - Self tuned with HPT - 347/423 --- Sold
    ​2013 5.slow F150 - MAK catless Y pipe - Roush catback - self tuned with HPT
    Reply With Quote  
     

  4. #4 Re: New member with question about unable to get shifter into PARK 
    SE Level Member
    Join Date
    Sep 2013
    Location
    Minnesota
    Posts
    4
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Well I've determined there is nothing wrong with the "shifter" per say....it's related to the ignition switch. Also you must have good battery charge to activate the solenoid in the shift lock mechanism...popping out the little plastic cap beneath the ign switch and pushing up with a small screwdriver. Releases the key plus shift lever then too works fine until you try to put the key all the way off.
    Not exactly sure of the chain of events for normal function but possibly he ign switch or related linkage is the answer...hope someone can shed a bit more light on this. Thanks!
    Reply With Quote  
     

  5. #5 Re: New member with question about unable to get shifter into PARK 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,921
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    its either the solenoid under the key is bad. or the solenoid in the shiftier is bad.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  6. #6 Re: New member with question about unable to get shifter into PARK 
    SE Level Member
    Join Date
    Sep 2013
    Location
    Minnesota
    Posts
    4
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    As I said, I've proven the problem is not really in the shifter and you can see that solenoid is moving properly...not sure if there is a solenoid at the ign switch...as I said, I did get the key to release using that access hole below the switch...just not sure why that hangs up....
    Reply With Quote  
     

  7. #7 Re: New member with question about unable to get shifter into PARK 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,921
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    see if this helps you out some.



    the key release under the steering wheel, you can cut a piece of vac tubing and put it in there, then put the cover/cap back on to hold it in place. its a good temp fix.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  8. #8 Re: New member with question about unable to get shifter into PARK 
    SE Level Member
    Join Date
    Sep 2013
    Location
    Minnesota
    Posts
    4
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Thanks much....I did discover that YouTube video a couple days ago but it just gives that as a temp fix but not a total solution.
    I appreciate the time and help you are contribuing...best regards.
    Reply With Quote  
     

Similar Threads

  1. 2002 GP GT shifter stuck in park.
    By danford1 in forum Introductions/Noob Questions
    Replies: 9
    Last Post: 08-24-2013, 07:48 PM
  2. Paddle shifter question
    By mudneck4 in forum Introductions/Noob Questions
    Replies: 5
    Last Post: 04-28-2013, 10:53 PM
  3. The dreaded "my shifter is stuck in park" problem.
    By BLWNPontiacs in forum General Tech Discussion
    Replies: 9
    Last Post: 02-19-2013, 01:47 AM
  4. Key Stuck in Ignition and Shifter Stuck in Park
    By GRAFIX in forum General Tech Discussion
    Replies: 6
    Last Post: 02-25-2012, 02:50 PM
  5. Stuck in park! Cant push shifter button!
    By 01STOCKGTP in forum General Tech Discussion
    Replies: 16
    Last Post: 04-05-2011, 09:23 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •