Coolant elbows will be replaced with aluminum ones
|
|
07-26-2013
Coolant elbows will be replaced with aluminum ones
07-26-2013
07-26-2013
look at the sludge there, yuck.
07-26-2013
I really hope its only the gaskets and not the heads
07-26-2013
Now i have to figure out how to clean all the gunk off the manifold since its pretty toasted on there
07-26-2013
Brake Parts cleaner or some purple power. Let it soak for a while.
While stuff it apart, clean up the throttle body aswell.
And make sure to put RTV in the 4 corners of the LIM, sometimes people forget that small step.
07-26-2013
brake cleaner, and a scraper does well, razor blades to clean up the matting surfaces, then brake cleaner and a rag to wipe it down.
clean any crap you can see out of the heads cooling ports too.
07-26-2013
at this rate he will have it up and running my morrning haha
Originally Posted by Bio248
Originally Posted by Kilroy
07-26-2013
im voting this guy "best noob ever".......
07-26-2013
07-26-2013
Best i could do as far as cleaning with spray cleaner,i couldn't find a small enough brush for the tight spots
07-26-2013
He just strikes me as a guy that knows a little about cars and took the matter into his own hands.
And he works fast lol.
07-26-2013
I wish! Lol i have to find the gaskets 1st.i doubt autozone will have them
07-26-2013
best noob ever fits him perfectly look at what he has done in 2hrs time.
Originally Posted by Bio248
Originally Posted by Kilroy
07-26-2013
call up oreilly's they should have it in stock
Originally Posted by Bio248
Originally Posted by Kilroy
07-26-2013
very fast, sh1ts already clean lol
de greaser also works for the nooks and crannys of the lim, then blast it with a garden hose. its what i did to my lim.
07-26-2013
^^ still stands if he gets the LIM now lol
Originally Posted by Bio248
Originally Posted by Kilroy
07-26-2013
Well let just say i own a few ls1 powered cars/trucks...i had a 2002 grandam that has 200k miles and still running but belongs to my sister now.i only paid 1,500 for the 04 grandprix
07-26-2013
aka,,,, not scared to get your hands dirty.
07-26-2013
Am i looking at $75-100ish for gaskets? I have plugs,coolant,and thermostat already
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
