|
|
07-25-2012
I have a 99 gtp with a broken tranny, and the engine has 220,000miles on it so i want to change them both, i found an engine and Transmission out of an 04 CompG GTP and was wondering if that engine and transmission will just bolt into my car. or if i will have to do any PCM or instrument panel modifications to make it work?
07-25-2012
Short answer, no.
It will not work.
Engine and trans are different than your cars, even if you used the PCM from the 04 car, it will not match up to anything else in the 99 car.
You need a 97-02 trans from a supercharged car.
07-25-2012
The only thing that is materially different or that wouldn't work well in your car is the transmission. You can easily use the engine with a throttle body adapter and fuel rail swap. (you have your old fuel rail)
07-26-2012
where can i get the throttle body adapter?
07-26-2012
Either 98IraqVet, maybe ebay or ZZP
07-26-2012
I take it he didnt read much of our posts with a reply like that.
Sure you can use the motor no problem, but its not just a drop in and drive type of deal, there are many small things that have to be changed in order to run it correctly.
And as said before, you can't use the transmission.
07-26-2012
Doesn't mean he didn't read my post and decide to go forward on teh motor.
07-26-2012
so would you suggest dropping that motor in or not? what all needs to be changed? i planned on doing a cam, and intercool, injectors, im sure ill have to have wiring harnesses changed also.?
07-26-2012
Here's what you do. Put your map sensor, TB (with adapter), evap or use the Gen V evap, run a pcv port to the TB (drill and tap) and it'll go right in.
07-27-2012
Welcome to the site
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
