Thread: how do i delete the evap system?

Remove everything EVAP related and turn off all the codes via a tuner.

could I run it without a tune tho?

what all is there the evap purge solenoid and evap canister anything else?

It'll set a code

Sent from my KYOCERA-C6745 using Tapatalk

Originally Posted by Alexgp

what all is there the evap purge solenoid and evap canister anything else?

theres about 12 related codes for the evap. all sorts of dumb crap really. funny but they range from the p0400's all the way up to p1400's code numbers. aka codes all over the damn place.

I personally just removed whatever connected the system to the engine under the hood.
Then waited to see what codes it popped.
Removed those codes

it will take time to become "ready" if you only delete the offending codes lol

the only thing i need to wait to become ready is my up stream o2 sensor, cat, egr, evap and rear o2, all that craps gone. thats about 24 codes worth of deletion. lol

I already have a evap purge solenoid code so I just wanna delete the system

so on the the throttle body I just plug it up right?

Originally Posted by Alexgp

I already have a evap purge solenoid code so I just wanna delete the system

you need a tuned pcm then.

Originally Posted by Alexgp

so on the the throttle body I just plug it up right?

yes, put a vac line cap on it.

stupid monitors. I'm waiting for the o2 heater to ready. Wtf

What do you do with the extra fuel line?

What extra fuel line?

I am referring to the tubing connected to the EVAP canister that runs parallel with the pressure and return fuel lines.

leave it there. why remove it all? just take it off the tb and its deleted, as long as all the codes are also deleted the cel wont pop up.

You're looking for the easiest solution, and since you don't have a tuner, the easiest solution is to read the code and fix the problem. There's no benefit to removing the EVAP and deleting properly is a can of worms.