This HOW TO write-up on Changing your Supercharger Pulley has been added to the How To section and can be found HERE.
|
|
01-11-2008
This HOW TO write-up on Changing your Supercharger Pulley has been added to the How To section and can be found HERE.
01-12-2008
now you need to do another write up on how to change MPS pulley.
01-12-2008
I need to do something like that. As simple as it is, its still good information as that breather nut tend to be the part the kinks up all well laid plans to me.
09-10-2008
Say, I was just browsing the forums and came across this write up, and thought I'd let you know that one of the picture links is wrong. The second thumbnail on step four links to 'Install_2.JPG' when it should link to 'Setup2.JPG'.Originally Posted by webracin
Thanks for the how-to though!
05-02-2009
approximately how much HP will swapping the pulley add?
05-02-2009
You have to have supporting mods...you just can't drop a pulley size and except to have a faster car.
05-03-2009
alright, what else would I need in addition to a the smaller pulley?
01-31-2010
do you really needed the pulley remover? (yeh i no its a stupid question)
02-01-2010
Unless you are super man and plan on pulling the old one off with your hands then yes. It also installs the new one.
02-01-2010
could you take the entire s/c to a machine shop and have this done?
02-01-2010
Could but'd you probably pay out the ass and why take the S\C off and have to buy new gaskets and worry about it sealing if you don't have to. Just rent one, buy one , or have someone put it on for you.
02-01-2010
Because Im buying a complete unit and have an mps hub to put on, so I thought that would be the easiest way.
02-01-2010
There's a grand prix chapter for the OKC area i believe. See if you can google them surely someone has a puller that will install that for you for free. I have a puller but i'm way up in Topeka and it's lent out to another member at the moment.
Tornado Alley Club Grand Prix....
http://www.okgpc.com/
02-01-2010
Alright, I'll look into it. thanks
02-02-2010
does the little cap on the end of the snout unscrew?... ... I tried prying it out and snapped off the edges assuming it was a pop in christmas tree... I think I'm screwed now... ugh...
05-26-2010
can you use any pulley remover, or does it have to be the Gm supercharger pulley remover?
05-26-2010
DO NOT use any "Pulley Remover" You can damage the snout doing so. Rent one from ZZP or one of the other online vendors. Maybe there is someone local in Ohio that has one available too.
05-26-2010
Thank you, im new to all of this
06-28-2011
I have a similar problem..only i screwed right through the plastic piece and now i cant get the pulley to budge. Now its bent beyond use..
12-04-2011
Need a pully puller message me. If u can let me. Borrow or. Sell me one thanks
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
