Thread: General Info: Swap your steel oil pan for an aluminum one

Page 1 of 4 123 ... LastLast
Results 1 to 20 of 69
  1. #1 General Info: Swap your steel oil pan for an aluminum one 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    In the past I've swapped steel to aluminum oil pans on both H/C and W body cars. Recently I almost suggested to a W guy that he buy an H/C pan by mistake. The mount under the harmonic balancer on the W body prohibits this and vice versa on the H/C body.

    Here are the differences in picture form to help you guys make the right choices if you choose this "nice to have" mod. Ensure you have the proper oil pick up tube and oil filter adapter to go along with the oil pan of your choice. For example if swapping an H/C aluminum pan onto a 97 Bonneville you want all three items. In a Regal you need the pan and pick up tube only.

    W body pan with mount provision. W body with steel subframe requires the removal of the lip on the outter part of the mount bucket. It's a quick cut/grind.



    H body pan



    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  2. #2 Re: General Info: Swap your steel oil pan for an aluminum one 
    GTX Level Member
    Join Date
    Aug 2010
    Location
    Minnesota
    Posts
    1,409
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    So if I do this swap into my 02 Monte Carlo that already has an aluminum sub frame, all I will need is the w-body pan and the pick-up tube? Do I still need the bracket as well?
    Reply With Quote  
     

  3. #3 Re: General Info: Swap your steel oil pan for an aluminum one 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    If you don't have the bracket, you need the bracket.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  4. #4 Re: General Info: Swap your steel oil pan for an aluminum one 
    GTX Level Member
    Join Date
    Aug 2010
    Location
    Minnesota
    Posts
    1,409
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I got the bracket, pick-up tube and pan. All I am missing is the bolts for the bracket. Do you happen to have any extras Bill, or know the sizes?
    Reply With Quote  
     

  5. #5 Re: General Info: Swap your steel oil pan for an aluminum one 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    I grabbed some out of the parts case the other day. They are gray/silver in color, and the same thread pitch/size as the bolts for the alt tension and dogbone mount, only about 1.5-2" in length. I think it's a M10 x 1.50 thread
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  6. #6 Re: General Info: Swap your steel oil pan for an aluminum one 
    GTX Level Member
    Join Date
    Aug 2010
    Location
    Minnesota
    Posts
    1,409
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Thanks!
    Reply With Quote  
     

  7. #7 Re: General Info: Swap your steel oil pan for an aluminum one 
    GT Level Member
    Join Date
    May 2012
    Location
    Albuquerque, NM
    Posts
    294
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    What are the pros/cons (if any) of the aluminum pan? Cools oil better?
    Reply With Quote  
     

  8. #8 Re: General Info: Swap your steel oil pan for an aluminum one 
    GTX Level Member
    Join Date
    Aug 2010
    Location
    Minnesota
    Posts
    1,409
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Delete
    Reply With Quote  
     

  9. #9 Re: General Info: Swap your steel oil pan for an aluminum one 
    GTX Level Member
    Join Date
    Aug 2010
    Location
    Minnesota
    Posts
    1,409
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Is this the right amount of gasket maker for these pans?

    Reply With Quote  
     

  10. #10 Re: General Info: Swap your steel oil pan for an aluminum one 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    As you noticed when you put it on, that's a bit much. That looks like copper RTV, in this case I would suggest the gray engine sealant like GM etc uses.

    When you put that much on, likely it gooped out all over the place.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  11. #11 Re: General Info: Swap your steel oil pan for an aluminum one 
    GTX Level Member
    Join Date
    Aug 2010
    Location
    Minnesota
    Posts
    1,409
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I got that picture off another forum. It looked like a little too much so I thought I would ask.

    I think I am going to use some Permatex Right Stuff on this. I have read and heard good things about it.
    Reply With Quote  
     

  12. #12 Re: General Info: Swap your steel oil pan for an aluminum one 
    GTX Level Member QUICKSILVER462's Avatar
    Join Date
    Jun 2009
    Location
    HUDSON
    Posts
    1,133
    Thanks (Received)
    3
    Likes (Received)
    8
    Dislikes (Received)
    0
    WHen I did my pan, I used the GRAY silicon that is recommended for hard surfaces, and I only used a bead of about 1/4 the size of that in the picture, with a little extra where the front and rear covers sit on the rail.
    Reply With Quote  
     

  13. #13 Re: General Info: Swap your steel oil pan for an aluminum one 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    The way I did it was to put some on the pan and smear it around with my finger. That way you ensure the entire surface is coated lightly and consistently. Right STuff should work well.

    Slim - it's structural and makes changing the mount and or pan gasket about a bazillion thousand gazillion times easier than that dumb horseshoe pile of crap bracket.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  14. #14 Re: General Info: Swap your steel oil pan for an aluminum one 
    GTX Level Member
    Join Date
    Aug 2010
    Location
    Minnesota
    Posts
    1,409
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Last questions...I think. lol

    Do you think I should get a new pick-up tube or should a used one be fine?

    Also is there a gasket for the pick-up tube? I can't seem to find any online.
    Reply With Quote  
     

  15. #15 Re: General Info: Swap your steel oil pan for an aluminum one 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    A used one that is for that pan will be fine. It is different than the one for the steel pan. There is a gasket for it, however you can use a little RTV w/o worries. I've done it both ways.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  16. #16 Re: General Info: Swap your steel oil pan for an aluminum one 
    GT Level Member jlgp2007nc's Avatar
    Join Date
    Sep 2012
    Location
    North Carolina
    Posts
    482
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Both ways indeed.
    Reply With Quote  
     

  17. #17 Re: General Info: Swap your steel oil pan for an aluminum one 
    SE Level Member MGRead's Avatar
    Join Date
    Jun 2012
    Location
    Coral Spring, Fl
    Posts
    81
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Does anyone have any information on putting a aluminum pan on a 04 Grand Prix that has the aluminum sub farms. Everything I can find say I need the steel subfram
    Reply With Quote  
     

  18. #18 Re: General Info: Swap your steel oil pan for an aluminum one 
    GT Level Member jlgp2007nc's Avatar
    Join Date
    Sep 2012
    Location
    North Carolina
    Posts
    482
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    You dont

    Sent from my SPH-L720 using Tapatalk
    Reply With Quote  
     

  19. #19 Re: General Info: Swap your steel oil pan for an aluminum one 
    SE Level Member MGRead's Avatar
    Join Date
    Jun 2012
    Location
    Coral Spring, Fl
    Posts
    81
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by jlgp2007nc View Post
    You dont

    Sent from my SPH-L720 using Tapatalk
    Why not?
    Reply With Quote  
     

  20. #20 Re: General Info: Swap your steel oil pan for an aluminum one 
    GT Level Member jlgp2007nc's Avatar
    Join Date
    Sep 2012
    Location
    North Carolina
    Posts
    482
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    From what I understand, the aluminum pan and sub frame shouldn't have any issues. My 07 has both aluminum and came that way. I remember reading that modification of some bracket is needed for an aluminum pan and steel subframe.

    Sent from my SPH-L720 using Tapatalk
    Reply With Quote  
     

Page 1 of 4 123 ... LastLast

Similar Threads

  1. Top Swap Info and Faqs, Also lots of 3800 Info
    By 02BlueGT in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 437
    Last Post: 09-04-2024, 11:56 PM
  2. Projector General Info (Aiming, PL flash, High/Low, Pics, etc.)
    By LowlyfeGTP in forum Visual/Body Modifications
    Replies: 17
    Last Post: 06-26-2012, 03:14 AM
  3. Top swap and general question
    By GAFF in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 8
    Last Post: 07-25-2010, 08:28 PM
  4. Cradle steel vs. aluminum
    By minichopper6hp in forum Brakes/Suspension/Chassis
    Replies: 14
    Last Post: 09-17-2009, 09:38 AM
  5. General Gen. V blower swap questions
    By GTPrix in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 10
    Last Post: 03-03-2009, 06:38 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •