|
|
07-16-2010
Yeah its an 05. And i found a way to make it work just had to make a hole (for the PCV tube instead of the IAT sensor) It appears we have made it work will update once i get it hooked up just need to get some couplers and I will be fine. BTW we are using some metal piping that we found laying around work that was already fabbed to the shape we needed (imagine that)it will be painted with high temp paint and primer to be metallic blue
07-16-2010
Nice dude, get us pics so the 04+ guys can know what to do with the sensor. Good luck!
07-16-2010
Will take some this weekend as I work. When i get everything spread out and as it goes in. The piping is already cut with the hole for the sensor. Its going to be interesting but when isnt it?
07-16-2010
Is there a "special" way to get the IAT off of the original air intake, I dont feel like cutting it out.
07-16-2010
Pull it out?
07-16-2010
It doesn't pull out. What I would do is just put a nice simple slit with a knife from the outer edge, to the inner edge and try and wiggle it out. That way the stock pipping is not completely destroyed.
07-16-2010
Uh mine just pulled out.
07-16-2010
oh.. I couldn't pull mine out, it was surrounded by the rubber from the intake lol
So I guess try pulling it out first then if that doesn't work do what I said.
07-16-2010
Trust me,, I tried pulling it right out, wasn't going anywhere...Originally Posted by nawarkk
I'll try making a little slit in it. much appreciated
07-16-2010
Done and Done...
Nice up-grade from my old intake.
07-17-2010
thanks manthe very small, compressed, extremely restrictive part of the exhaust between the cat and the resonator.
nawarkk, thanks for the write up and clearing things up for us noobs
07-18-2010
Hook it up with a picture yo
07-18-2010
My filter is a little beat up lol.
07-18-2010
Clean your filter^^^^ it looks a lil rough.
07-18-2010
haha I HAVE cleaned it...the results of a past life of a FWI,
07-21-2010
this work as good and effective as a k&n or something would? is there much of a hp gain?
07-21-2010
this work on an 01 gp gt? and is it that much better then the stock intake?
07-22-2010
Does the stock airbox just come right out? Do you have to keep any of it in there?
07-22-2010
i'm not sure which year you've got, but if it's an 04+, it should just pop right up & out, but you'll need to open up the airbox & remove the pcm on the bottom before pulling the airbox out. i removed mine without disconnecting anything, put some rubber underneath & zip tied it down where the airbox used to sit. hope i don't have any problems with that...
anyway, my baby sounds a lot louder & feels better, but sometimes i hear some clicking or rattling from the engine while stepping on it... the filter isn't in contact with anything because i suspended it with a zip tie... any ideas what the noise could be?
Last edited by neyel8r; 07-23-2010 at 02:06 AM.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
