Got it. All good. Didn't realize it was right there, only about .75in up the shaft.
|
|
03-31-2017
Got it. All good. Didn't realize it was right there, only about .75in up the shaft.
08-11-2017
hey all
I have play in what seems like the Rack itself like scotty said slop in the rack . but I was thinking could it be in the intermediate shaft . before I pulled the tranny and frame there was no play at all .
09-24-2017
Im in the middle of this project. Got everything disconnected, but now I'm having a hard time getting the Pinion to slide back up into the steering linkage u-joint. Any tips or tools that can get everything to slide back in? Do I need to grease them up? Somehow pry the ujoint part open a bit? Thanks for any help!
09-24-2017
you should already have the rear sub frame lowered, so pull the shaft down as far as it will go, then jack the frame up to it. easiest way ive found to get that damn thing back on.
09-25-2017
Update:
Got the rack and pinion back in, connected everything, and got it realigned. So far so good (but only a day into it.) We'll see how the driveway looks tomorrow morning!
09-26-2017
I have always used a small pry bar or screwdriver to open it more. Usually slides right in after that.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
