Can't find nothing on the forum about these plugs, but if anybody has any experience with them please comment.
Now I've ran Tr6ix years ago on the GS and they were flawless(left them at factory gap .035" I believe)
Switched up for a minute and went with the Tr6 all copper and they were nice too (gapped to 3800performance/ZZP recommendations well close enough at .053")
So now im going back to the NGK tr6ix iridium. though they recommend not to gap iridiums i've done it before, just not to NGK iridiums.
So NGK iridiums come pre gapped at .035"-.039" I believe and the NGK tr6 copper are recommended around .055" give or take for max power out.
Though the iridiums are precious metal, would I benefit from gapping the tr6ix up a bit maybe to around .045" a lil closer toward the copper tr6 range?
Tr6ix run cooler so they shouldn't get that hot. Im currently on a 3.4" pulley about 9-10lbs boost maybe less though.
But yeah these tr6ix have a lot to offer so im just tryna get the most out of them with a lil more gap