Thread: screws for plastic guard on seat

those are sheet metal screws. you'll need to try a few till one fits, they are not very large. inch long maybe 1/8 inch wide.

ARe you close to a junkyard?

Pretty sure phillips.

mine were philips.

if no junk yard, hardware store. one of them 2 dollar mulit packs of little screw would work if they wont let you take a few out and see what fits.

the smaller ace hardware stores will let you take a few small already loose items out for a test fit. just ask the sales, man tell him what your doing, most will work with you and be very helpful, even for a 1 dollar sale.

sorry to revive this older thread, but did you figure it out? i have a 2004 GTP and my passenger seat's rear plastic backing (the one that holds the ripcord to make the seat flatten forward) has done the same thing. I heard a pop and sure enough it's just dangling there. any input would be appreciated.

you guys could take the one off the other seat then match it up at the hardware store.

well the problem in the 04+ is the passenger side is different from the drivers side. the drivers side doesn't have it and i'm pretty sure those screws are in a black hole because i looked all over the place trying to find them.

its just a sheet metal screw. nothing special really.

the smaller ace hardware stores will let you take a few small already loose items out for a test fit. just ask the sales, man tell him what your doing, most will work with you and be very helpful, even for a 1 dollar sale.[/QUOTE]

our local ace is the same way. great store and service even for a $1 sale. staff actually comes to you and offers help when you walk in the store.

thanks for the input guys I appreciate it.