ok i know the trick for disabling the Daytime Running Lights..but how do u Disable the automatic headlights i want it to be manual (using the headlight switch)?
|
|
02-18-2014
ok i know the trick for disabling the Daytime Running Lights..but how do u Disable the automatic headlights i want it to be manual (using the headlight switch)?
02-18-2014
search for that, theres a bunch of threads that cover it. drl module in the dash needs to get unplugged and a fuse needed to be pulled.
02-18-2014
Backinblackgp.com has a way, I used it. You replace the photocell in the middle of the dash, next to the security light. With a 470 ohm resister.
Sent from my Lumia 900 using Board Express
02-18-2014
and that shuts the automatic headlights off? cause everything i read on that page says that works on all up to a certain year...cause mine just chimes if i take the fuse out...even with the heat sink unplugged
02-18-2014
Pulling the heat sink will disable the drls, and the resister disables the auto head lights, at least that's the set up I have on my 02 GTP
Sent from my Lumia 900 using Board Express
02-18-2014
ok ill try that out..
02-20-2014
On my car, which is a 2000 GTP, all I did was pull the DRL fuse and it disabled both the DRLs and the Auto In feature. I've heard that some will still chime, mine didnt, haven't had any probs.
03-02-2014
Where can i buy the resistor? None of the parts stores around here even know what it is lol.
03-02-2014
Radio shack or maybe a small hobby store
Sent from my Lumia 900 using Board Express
03-02-2014
1 more question i found them but which one do i buy? there is a 3 different ones......one is a 470 ohm 1/2W 5% Carbon Film Resistor pk/5.....and a 1K Ohm 1/4-Watt Carbon Film Resistor (5-Pack)....and 470 ohm 1/4W 5% Carbon Film Resistor pk/5...
03-02-2014
That will work.
03-02-2014
is there a specific one to use?
03-02-2014
Not really, you just need a certain resistance to mimic daytime.
03-02-2014
ok thank you!!
04-18-2014
it didnt work replacing with resistor its just made my headlights on all the time..
04-18-2014
What year do you have?
And get the photocell and measure the resistance when in the dark and that's the resistance you need in place of the resistor. I don't know why the one you used didn't work.
04-18-2014
Did u pull the heat sink for the drl's?
Sent from my Lumia 900 using Tapatalk
04-19-2014
Here you go.
http://www.backinblackgp.com/DRL_TS_Kill.htm
It should work. I did this in my brothers 03 and it worked.
04-20-2014
i got it.... the resistor didnt work so i cute the wires off the resistor and just used it as a jumper wire and it worked..
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
