Thread: Who is running PRJ Wires with a L67?

I ask because I am interested in getting a set, but I have heard that there are issues with length and routing. If any one who has a pic of these wires on their L67 please post them. thanks folks

A few pics from Impalas:





Or, same one as above, but under the mount and under the blower:



I have yet to see anyone complain about their length. I find them to be more than long enough with plenty of wiggle room to get them how you want them.

wow didnt realise how much wiring is under the hood until I saw that pic.
I know I have one of these but it all kinda blends in.

plenty of room here.

No length issues here.



Definitely get some, you won't regret it.

I had no problems

Awesome, thanks folks!! I am going to get a set.

Look they with stand fires I was at PRJ getting my trans looked at and the Pressure gauge blew a fitting and spray the engine with tras fluid and caught fire melted fuel lines all vac lines wiring and etc.. but the wired were ok

Sabrewings showed a pic of mine at the top of the thread with the wires routed under the blower but I changed them to this: (Oops; I didn't see the one where he had posted this pic also already - it didn't load the first time I read the thread!)

BTW, I do think the wires going to #3 & #5 could be a tad longer ideally.

Ya #'s 3 and 5 are somewhat short, but they still reach no problem.

Originally Posted by jims05ss

Sabrewings showed a pic of mine at the top of the thread with the wires routed under the blower but I changed them to this:

Yep, I posted both your pics for the comparison. They were easy to find since we just had this discussion not long ago.